I have an FWSM running Version 4.0(8). When i setup a packet capture in one of the contexts it doesnt capture any packets. I have created an access list for the interesting traffic and applied it to the capture. I know the traffic is going trhough th...
Hi,i have a 3750 switch and i wish to use IP SLA. i am running c3750-ipservices-mz.122-25.SEE2 which does not work. Does anyone know what version i can use to enable this feature.cheerstony
Hi I have a 155Mb link and i need to limit the traffic to 64Mb and drop the rest. Is QOS policing the right way to go or is there a better way. cheerstony
Hi,I have a vsat connection with 2 E1's in a multilink. Does it matter that they are showing different clock sources.?one is showing as Internal and the other is showing as Line.
Yes. When you make any changes to the ACL that you have applied to the capture you must delete the capture and re-enter it. It then starts to capture packets.
Hi, I think you are reading this the wrong way around. The traffic comes from 192.168.1.10 gets natted to 192.168.211.106 then goes to 192.168.111.2.In the trace the destination port, going to 192.168.111.2, is 5060. Cheers Tony
