Hi, This is my first time to use ISG feature on my ASR1k routers which will be acting as a LAC, terminating PPPoE sessions and tunnel them to LNS.My objective is very straightforward. Upon receiving a protocol PPP, fetch for the unauthenticated-usern...

Hello,I'm trying to do the following:1) Match the username "test"2) When matched, use the vpdn-group LAC to open a tunnel to the LNS and use the PPPoE Relay Capability to relay the PPPoE discovery and session stage there. This is my configuration whi...

Hello,I have this setup:PE1 router is connected to P1 router via single 1G Intf. P1 router is in turn connected to the P2 router via 8xSTM-1, and finally P2 is connected to PE2 via single 1G IntfPE1--P1==P2--PE2Now, this is how PE1 is seeing P1's MPL...

Hello, I have a very strange problem on my ASR-1006 BRAS router. This router is having two equal paths toward a P router via IS-IS. The BRAS is seeing the P router over the two paths and the two paths are installed in the RIB and FIB as follows:...

Hi, I have a strange CEF behaviour and I need to know if it's normal or not:This is a subnet of a PE router's loopback interface in the MPLS network. As you see, I have configured the loopback with /24 length intentionally and have received it via IS...