About JAMES WEST

JAMES WEST · 05-23-2023

Hi all, We are currently deploying a new Greenfield office, and l was looking at using Cisco DNAC to push some of the config using Templates. I have create the following template using "Regular Template and Jinga" after saving the Template l get the ...

JAMES WEST · 03-15-2023

Hi,We are currently evaluating a Cisco AIR-AP1800S-E-K9, but this is failing to be claimed in Cisco DNA.AP Running Image : 2.2.1.3Primary Boot Image : 2.2.1.3Backup Boot Image : 8.8.259.0DHCP Option 43 configured to use: option 43 ascii "5A1N;B2;I"DN...

JAMES WEST · 06-18-2022

Hi Everyone, I hope everyone is keeping well. We are in the process of deploying EAP-TLS in a pilot phase with a mix of Mac OS and Win10 machines in our estate. Currently Win10 machines are working and being authenticated to the Corporate WLAN, but ...

JAMES WEST · 03-29-2022

Hi All, I am replacing the default DNA self-signed cert. I have followed the steps and have the CSR using the following command (all done in Maglev):cat dnac01-sha256-2048.csrThis has been signed, and l have concatenated this with my Root CA. The que...

JAMES WEST · 12-13-2021

Hi everyone, We are currently running a pair of Cisco Nexus 7706 chassis, running 8.1(2a) SW. Looking at the following link - NXOS7700 EoL SW l am trying to determine if Cisco TAC will support this after LDoS looking at the following statement:Five (...

JAMES WEST · 08-25-2023

Hi, did you manage to resolve DNA not pushing to ISE default policy? Or did you move the settings to the Policy you created or used the default policy? We are currently deploying Guest portal and found the same steps you mentioned above, we have a se...

JAMES WEST · 06-06-2023

Hi, Is there any other options to remove the RED GNSS light, l have upgraded to 10.2(5) and this is still there? Thanks

JAMES WEST · 05-26-2023

Hi Preston, I have complied the config l was looking to apply, during the save it now informs me that the Template has conflicts and the "Commit" button is greyed out. Is there a way to check what conflicts it is referring to?Thanks, James

JAMES WEST · 05-23-2023

Hi Preston, Thanks for the feedback. We are not looking to implement SDA, but we are using the same build with LISP and similar config being deployed. With this command in the Template, we could push the config to the Edge Node (edge switch) and appl...

JAMES WEST · 01-16-2023

Hi Guys, Did you manage to deploy 1+1+1, or get an answer to your queries above? We are looking at a similar deployment, and wondering the exact same question of address for DNA Server at site 1, followed by addressing at site 2 and Witness site.Look...

Member Since	‎12-20-2005 11:38 AM
Date Last Visited	‎03-20-2024 12:30 AM
Posts	204
Total Helpful Votes Received	15

User Statistics

User Activity

Error in creating DNAC template

Cisco 1800 DNAC PNP not registering

EAP-TLS failed SSL/TLS handshake after a client alert

Cisco DNA certificate

Cisco support

Re: DNAC creates Guest Portal authorisation rules in default ISE polic

Re: GNSS-LED always - bright red - at Cisco Nexus 93180YC-FX3 chassis

Re: Error in creating DNAC template

Re: Error in creating DNAC template

Re: DNAC Disaster Recovery