Hello,   Following this document  https://www.cisco.com/en/US/technologies/tk648/tk362/technologies_white_paper09186a00800a3db9.html, it seems that SRC_AS and DST_AS fields in Netflow v9 used for BGP ASN information are by default in 2 Bytes format. ...

Hi, I'd like to know if it's possible to use a vlan to connect camera control. I usually use a direct ethernet cable between camera control port and SX80 port2 and it works great. But with the following design it doesn't work : SX80 PORT2 <--------...

Hello,Running CUCM 8.6.2, I try to activate the SSO module for user accessing the end user configuration page and a CTI home made application writte in Java.I use the following document for referecne : http://www.cisco.com/en/US/docs/voice_ip_comm/cu...

Hello,I have 2 sites interconnected by a H323 trunk. Site A has dial plan 32x site B has 3xxx.When on site A I want to dial a number on site B with for example number 3257 it will dial 325 in site A. This happen if I dial on-hook or off-hookIs there ...

Hello,I experience since a couple of days a very strange behaviour on our 2 access routers facing internet :I have two 7204VXR with NPE-G2 and 1Gb of ram. One router has 2 eBGP peers and the other has 3. The routers receive all internet routes from t...