Hi, I have 1 router (Cisco 2921), 2 ISP Link & 2 networks(one is 172.16.0.0 & another is 192.168.0.0). I want to pass 2 networks by 2 different ISPs, like 172.16.0.0 will be passed by ISP 1 & 192.168.0.0 will be passed by ISP 2. I have 1 firewall at...
Hi, I am having one 2800 router where the ISP link is, Another port is for ASA 5520. There are two 4503 core switches connected with firewall. When i am connect the ISP, i can ping upto ISP Gateway, but not DNS(8.8.8.8) or any public IP. as a r...
Hi, I am working for a large campus network. The network has more than 70 VLANS in a Layer 3 Switch(Catalyst 4503). Customer wants to stop intervlan routing between all vlans except 2 vlans. How will i do that? I have also a Firewall (ASA 5520) & a R...
Hi Grana. Thanks a lot for your reply.But now i need again help. now the requirement is Failover of ISP with Loadbalancing. If one ISP goes down then it will automatically shift traffic with other ISP. When 2 ISP are active, one network will pass th...
Hi Vitaliy, Thanks for your reply.My router has 3 links, 2 for 2 ISPs & 1 for Lan which is actually connected with firewall. Nat is implemented on router. We are using ASA 5520 firewallRegards
Hi Grana, thanks a lot. but i am a little bit confused about LAN 2. do you mean it as physical interface?For your information, i have only 3 physical interfaces in router from which have only 1 lan interface which is actually connected with firewall....
Hi Grana, Thanks for your reply.No, at present i dont want to backup one link with other.Hi Vitaliy, Thaks for your solution. But for your information, i have ony 1 lan interface which is connected with firewall directly. will it be ok?? Aside to thi...
Hi Grana, Thanks to hear from you again.I am using static route to exchange routes.Present Configuration:ip route 0.0.0.0 0.0.0.0 123.x.x.x (1 ISP which is in gi0/1 port)ip route 172.16.0.0 255.255.0.0 172.16.251.2 (local network)ip route 192.168.0.0...
