About BILL PETERSEN

BILL PETERSEN · 03-18-2019

Hello, Looking at an Expressway C and E deployment for MRA and SIP support and possibly B2B. Was wondering about the pros and cons about using the same cluster name for the ExpC cluster and the ExpE cluster. Also wanted to confirm best practice on th...

BILL PETERSEN · 05-04-2014

Hello,I have an existing Unity Connection 8.6 integration working with Exchange 2010 for single inbox and such. Things are working fine.I have built a new Unity Connection 9x cluster and plan to use COBRAS to migrate data but need to build the Exchan...

BILL PETERSEN · 03-11-2014

Hello,All the documenation on fax support on the VG224 talks about using MGCP for standards based T38 support.So does that mean that it uses protocol based T38 switchover?In looking at the VG224 MGCP GW config on call manager it doesnt show much othe...

BILL PETERSEN · 02-17-2014

Hello,So under the SIP trunk configuration - Call Routing Information - In CUCM, the "Remote-Party-Id" and "Asserted-Identity" check boxes are both checked and the "Asserted-Type" is set to "Default".However after looking thru enterprise parameters a...

BILL PETERSEN · 01-06-2014

Hello,Seems like most people these days are using flash as the location of their CME phone firmware, config files, GUI, rintones, etc.However if you dont need to do locals per phone or phone type, what are the benefits of using flash: versus system: ...

BILL PETERSEN · 06-20-2016

Awesome thanks That is what I was leaning to but just wanted to be sure

BILL PETERSEN · 06-20-2016

Hi Kevin, Thanks for the feedback. So part of the process on the CER to PSAP call flow is CER forwarding the call back to CUCM. Does CER use a CTI Route Point to forward the call back to CUCM? CER has to use something similar to how it uses CTI ports...

BILL PETERSEN · 06-19-2016

Hi Kevin, This is a very nice description of the CER CUCM process. One question though on the process of the call from CER back to CUCM after the calling number has been modified. What is being used to make the call from CER back to the CUCM route p...

BILL PETERSEN · 03-20-2014

Hi Alexthanks for the responseSorry it took me a while to respond. I am having issues with the new site. I couldn't view this discussion from the new cisco site. I can only get to it by clicking on the email link.I have looked at that link quite a f...

BILL PETERSEN · 02-17-2014

Thanks for the replyBelow is Cisco's recommended CUCM setting on the SIP trunk if you want to use p-asserted-identity. Under the Asserted-Type you have the choice of PAI, PPI, and Default. Do you know what CUCM uses if you select "Default" for assert...

Member Since	‎03-16-2011 05:02 PM
Date Last Visited	‎10-18-2023 04:26 PM
Posts	82
Total Helpful Votes Received	5

User Statistics

User Activity

Expressway C and E Cluster names and FQDN's and DNS entries for cluster names

Using same Exchange 2010 account for 2nd Unity connection Single Inbox integration

VG224 standards based T38 fax support using MGCP

CUCM SIP Trunk config - What are the defaults for Asserted-Identity and Remote-Party-ID

CME 9 Location of cnf and per phone versus per phone type

Awesome thanks

Hi Kevin,

Hi Kevin,

Hi Alexthanks for the

CUCM SIP Trunk config - What are the defaults for Asserted-Ident