About bgibson.PT

bgibson.PT · 05-06-2013

ok guys i'm stumped on this one. The VPN Client connects put the only thing i'm able to ping is the router. I checked and the clients on the other side are set with the default gateway of 192.168.131.1. Not sure whats going on. Below is the config. S...

bgibson.PT · 04-01-2011

I am trying to upgrade our UC520 using configuration assistant and software pack UC520_8.1.0.zip. It seems to go all the way to voicemail and then it fails. This is what CCA is now saying for my version information. It seems partially installed. Any ...

bgibson.PT · 10-13-2010

Here is the problem I have. I can connect to the ssl vpn with Any Connect just fine. Split tunnel also seems to be working. I can ping the inside interface of the ASA unit. I however can not ping or access any other way hosts on the inside network on...

bgibson.PT · 09-27-2010

I have configured the asa using the vpn config wizard but it still doesn't work properly. The Vpn connects no problem, However i cannot access any resources on the 192.168.1.x subnet. Not sure what i'm missing here below is a copy of my config.ASA Ve...

bgibson.PT · 05-07-2013

well i solved the issue but wanted to post the solution in case others run into this issue. The router was running ios version 15-1.m3. I was starting to think that i would have to do a tac case so as a matter of habbit i always upgrade the ios befo...

bgibson.PT · 05-07-2013

I did try the config with just a physical interface instead of with a sub interface. The behavior is the same. The gigabit 0/0 interface is connected to a managed switch with a default untagged vlan 1 trunk port. I will be adding aditional vlans lat...

bgibson.PT · 05-07-2013

Yes It is hooked up to a switch that wiil have multiple vlans for wireless at a later date. I did it that way to allow me to add it later with minimal disruption. I know I don't need it just yet but it shouldn't make a difference to the VPN config.Se...

bgibson.PT · 04-01-2011

I have tried installing the whole software pack and upgrading just the voicemail and it still won't work. Please Help. I checked in the status and it always fails at voicemail boot loader install. In the staus window this is what i get.bl_boot_helper...

bgibson.PT · 10-14-2010

Mad the changes put i still can only ping the inside interfaceof the ASA. Any other ideas?

Member Since	‎06-10-2008 09:56 AM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	15

User Statistics

User Activity

Cisco 3945 Client VPN connects but doesn't pass traffic

Error voicemail installation Failed while upgrading UC520 using cca

ASA 5505 SSL Vpn Issue

ASA 5505 Ipsec Client VPN config Issues

Cisco 3945 Client VPN connects but doesn't pass traffic

Re: Cisco 3945 Client VPN connects but doesn't pass traffic

Re: Cisco 3945 Client VPN connects but doesn't pass traffic

Re: Error voicemail installation Failed while upgrading UC520 us

Re: ASA 5505 SSL Vpn Issue