About Lin Ma

Lin Ma · 01-03-2020

Currently we have a router ASR-1001X and using 100M MSTP link leased from ISP to connect HQ corerouter. The connectivity is UTP, so we inserted GE-T and configured 100M with no auto negotiation, the port is working fine as below interface GigabitEth...

Lin Ma · 03-13-2017

We got a scenario that two N9k created as vPC with HSRP (Active:10.24.44.2/Standby:10.24.44.3 VIP:10.24.44.1). But the traceroute shows the traffic always go to the standby even we manually set the physical IP as the gateway. 1 <1 ms <1 ms ...

Lin Ma · 01-29-2016

The problem is when configure the TACACS for N9K, the TACACS user could only login successful for the first time only. Then all attemps will failure per the log: 2016 Jan 29 01:51:39 HOSTNAME%AUTHPRIV-6-SYSTEM_MSG: START: ssh pid=13840 from=::ffff:...

Lin Ma · 01-29-2016

We got a problem that TACACS user could login to N9K via TACACS ID only one time, after that all login attemps are failure. The log shows: 2016 Jan 29 01:51:39 HOSTNAME%AUTHPRIV-6-SYSTEM_MSG: START: ssh pid=13840 from=::ffff:10.25.158.105 - dcos-xine...

Lin Ma · 01-13-2014

Is WCS still in Life or service ? We informed by sales that WCS was replaced by NCS, but i could not find purchased items in EOL announcement:WCS-STANDARD-K9CON-CSSPU-WCSSTDK9WCS-APBASE-100CON-CSSPU-WCSAB1CIs anyone know whether the above items stil...

Lin Ma · 01-04-2020

Thanks for the reply. But the problem is the port could not be up after we directly switched to Fiber SFP, and the link is working good in another ASR with same port configuration. The only thing I can found is we configured “speed 100” under GT-E wh...

Hi Gatti: · 01-31-2016

Hi Gatti: Thanks for you valuable reply. But from the bug information, it was found in 7.0(3)I2(1a), and my version in N9k is 7.0(3)I2(2a). So is 2a also has same bug ? Also, the bug also shows it has been fixed in coming version. But from the web...

Hello @Rajeshkumar Gatti · 01-30-2016

Hello @Rajeshkumar Gatti Thanks for the reply, don't know why your comment was not post in this discussion. As you said, the might relative to bug CSCux43153 , but my NXIOS version is 7.0(3)I2(2a), is it also impacted ? as this is the last version o...

Lin Ma · 01-29-2016

What's the default timeout for cache user ?

Lin Ma · 01-13-2014

Yes,i also supposed WCS should be EOL but the announcement didn't list mentioned part No. and i need a prove to explain to the company for replacement.

Member Since	‎05-26-2013 01:22 AM
Date Last Visited	‎06-15-2023 06:50 AM
Posts	30

User Statistics

User Activity

A strange interface problem on ASR1001X

Nexus 9K vPC with HSRP. The traffic always go to the standby

Could not login to N9K via TACACS

How could remove cache user-account from Nexus 9K ?

Is WCS still in Life or service ?

Re: A strange interface problem on ASR1001X

Hi Gatti:

Hello @Rajeshkumar Gatti

What's the default timeout

Is WCS still in Life or service ?