About dbrown

dbrown · 12-12-2013

Hello Cisco experts - I'm trying to determine if its possible to setup a wireless LAN so that only one app from the google and apple app stores will run. The goal is to setup a wireless network for our customers to use that will let them download an...

dbrown · 12-06-2013

Hello Cisco Experts! I've recently taken over a new role from a co-worker and could really use some expert advice. I'm attempting to setup Outlook Web Access and a secondary MX record over at my failover datacenter. There I have a 5510 which alrea...

dbrown · 12-04-2013

Hello Cisco Experts - I'm trying to setup a new DHCP scope on my Cisco 2504 and am getting the error referenced above. Here are the settings I am using:I have another range setup in exactly the same way only it runs from 10.35.209.65 through 10.35.2...

dbrown · 05-29-2013

I'm having a problem with an ASA 5510 and software from ManagEngine (Firewall Analyzer). They are saying that syslog 113019 is not getting data over to the server where the firewall analyzer is installed. I'm checking the config and I see it enable...

dbrown · 01-25-2013

Probably a very simple question for you guys, how do I setup an enable password for an ASA 5510? At the moment its setup to authenticate using RADIUS (which I'd like to keep doing) but I need to setup an enable mode password. Is it as simple as thi...

dbrown · 12-09-2013

Sorry for the delay. The problem is that I was trying to setup another scope in the same subnet which this controller can't do. Thanks!

dbrown · 12-09-2013

Thank Jon, after researching this I found you were right. We are using Proxy Arp just as you describe.

dbrown · 05-29-2013

Actually I think I got it:logging message 113019 level 5I'll know for sure when I see data in the reports tomorrow. Thanks again for the assist!

dbrown · 05-29-2013

Hi JouniForss, thanks for the quick reply. I hadn't run that command prior and it does ideed show "no logging message 113019" which I assume is my problem. When viewing the syslog IDs in the ASDM it shows that one as debugging. I'm not sure why t...

dbrown · 01-25-2013

Thank you Karsten! I'd like to ask a follow up...can the enable mode password be setup per user? If so can it be set by logging in with that user and executing the command above or would that force everyone that logs in to use it to get into enabl...

Member Since	‎05-14-2012 02:56 PM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	13

User Statistics

User Activity

Need a way to restrict WiFi so only one app (apple or google) can run?

Need some help using multiple subnets on WAN interface for 5510

Getting "Error in setting DHCP Scope Network and Netmask"

Enabling syslog id 113019 for firewall reporting

How to setup an enable mode password on ASA5510

Getting "Error in setting DHCP Scope Network and Netmask"

Need some help using multiple subnets on WAN interface for 5510

Enabling syslog id 113019 for firewall reporting

Enabling syslog id 113019 for firewall reporting

How to setup an enable mode password on ASA5510