I have an access point connected to a 3750x switch. It looks like it isn't drawing enough power because I get an amber power light. I had this problem once before with a different switch vendor and I hard to configure some specific commands. After th...
I need to know exactly what the percentage of encrypted traffic is in regards to overall bandwidth usage? What tool can do this? SNMP based in a script would be sufficient if need be.Thanks,Routing, ssl, bandwidthRouting, ssl, bandwidth
A user posted this comment on a different forum:" MIMO refers to the ability to split a single data stream over multiple, adjacent communication channels and requires more than one antenna " Does this mean that with 802.11ac, single client can send d...
Hello, I need clarification on two items. 1) If a user has a file on say, box.net, and they download the file to their personal laptop and THEN upload to another site such as Dropbox using a personal account, can Cloudlock be aware of this? 2) How ...
It is applied on the out. And Thank you.
I will say from my performance testing in the past, with and without the QoS policy, there is a small decrease in throughput overall.
Thanks,
Thank you everyone and especially you Joseph, for assisting me once again.
1) Service levels?Just that voice always go first to avoid choppy calls and second, that the med queue traffic is at least able to run regardless of any other traffic. The me...
This is great info Daniel. It looks like my current version doesn't support all the file options.router(config-applet)#action 1.4 cli command file ? pattern response pattern <cr>router(config-applet)# How can I make it work with this snippet:even...
