Best Practice UCS with iSCSI Storage and Nexus (without iSCSI Boot from SAN) with Disjoint Layer 2?
Hello how shoult I release an UCS iSCSI Storage Projekt over Nexus
-Is the only answer Disjoint Layer 2?
Pleass Help
Hello UCS frinds
My Question is
-Can I change the Chassis/FEX discovery Policy ONLINE from "none" to "port Channel"
After I set it to Port Channel i have to reacknowledge the Chassis
Can I Do this online?
Without intetrrupt?
Hello, im working on a test deployment of UCS. We have two UCS 624820 FI's with a Chassis and blades for the test aktually FW 1) Creating a Dynamic vNIC Connection PolicyWith Adaptzer Policy: VM Ware PassThruoght 2) I Aktivated VT and Bios Settings•...
Hello all I have a big Problem.We Need to Update our UCS FW (2.01 to 2.13 to 2.23)We have connect our Storage over direct attach ed FC Storage Ports. FI's are in FC Switch Mode.If I make the Update the VSAN Option "Enabled Default Zoning" doesen exis...
Hello i create a UCS Central free lic with the GUID and downloade the lic file to my PC.Than I would Uploade the File to the UCS Central Licening Center an I get the Error That the File already exist But this is a new Installation and i don't see an...
Hello What UCS Firmware Version does I need If I have UCS Manager managed Blades ore C Servers, that I Can Use that M2 Raid for ESXi? And the Second Queston is how it works on stanalone Servers?I Have a C220M5 with that Raid controller and two M2 Dis...
I Think about Lan Pin Groups yes.
For Example:
-FI-A Port 17/18/19/20 (one ETH Port Channel) Port17/18 are conect with NexusA and 19/10 are connectet with NexusB
-Same FI-B
-Can i create a "FI-A Lan Pin Group" with FI-A Ports 17/18 who works in an ...
Hi Walter
We want a clean solution with iSCSI
The best way i think are seperate ETH Ports on the Fabric interconnect who are going to the Nexus?.
Because the other sollution is:
If i have 4ETH Uplinks on each FI (2right 2left)over this 4uplinks ETH...
That means normaly I can
Switch from the Option "None" to "Port Channel" without interrupt?
After that i Have to reack IO Modul 1 and then if all is up again IO Modul 2?
Thats it?
