About acotelcom

acotelcom · 03-15-2010

Hi everybody.We are planning a migration from two 6509-E chassis with a WS-SUP720-3B each, to the same two chassis with a VS-S720-10G each, to add VSS support to the system, and I have a couple of questions:I've been looking for some information abou...

acotelcom · 09-04-2008

The first of all, thanks in advance.We are making a new architecture with FWSM on 6500 and we have problems with the access trought it.I know the Cisco PIX, and work with it, and I don't know if this is true or i have a big mistake or is different in...

acotelcom · 08-29-2008

Hi all,I'm having a problem with the established connections through an ASA 5540 firewall.The scenario contains two interfaces, outside and inside.I want to allow navigation and ICMP connection from hosts from the inside with a NAT configured public ...

acotelcom · 08-29-2008

Hi all,I'm having a problem with the established connections through an ASA 5540 firewall.The scenario contains two interfaces, outside and inside.I want to allow navigation and ICMP connection from hosts from the inside with a NAT configured public ...

acotelcom · 03-16-2010

Thanks for your answer, Giuseppe.

acotelcom · 09-07-2008

Yes, it's true, but the ping has another problem.You must open the both side to let work it. If you only open the out rule, it don't work.

acotelcom · 09-02-2008

It's possible that we have asymetric routing in the internet side. Is that a problem? Is a problem for all communications (TCP, UDP) or only to ICMP?

acotelcom · 09-01-2008

The first at all, thanks in advance.My configuration is like in a PIX, where i need to open with a ACL the traffic from a minor to a higher level, and a NAT rule from the higher to the minor.With that configuration, where i let all traffic by IP in t...

acotelcom · 09-01-2008

The first at all, thanks in advance.My configuration is like in a PIX, where i need to open with a ACL the traffic from a minor to a higher level, and a NAT rule from the higher to the minor.With that configuration, where i let all traffic by IP in t...

Member Since	‎08-29-2008 04:46 AM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	9

User Statistics

User Activity

Compatibility between VS-S720-10G and WS-SUP720-3B?

Understand NAT and access rule in FWSM on 6500

Problems with stablished in ASA 5540

Problem with established connections in ASA 5540

Re: Compatibility between VS-S720-10G and WS-SUP720-3B?

Re: Problem with established connections in ASA 5540

Re: Problem with established connections in ASA 5540

Re: Problem with established connections in ASA 5540

Re: Problems with stablished in ASA 5540