*Jul 27 17:26:14.090: %VOICE_IEC-3-GW: SIP: Internal Error (INVITE, invalid IE content): IEC=1.1.100.7.35.1 on callID -1 Having an issue where calls inbound from the provider are failing on the CUBE with the error above. This is new behavior that wa...
Wondering if anyone else has seen this and might be able to recommend one more thing to look at before I open a case.I have an admin user that sets up a lot of con calls during the day. Sometimes the users function is just to get all the parties tog...
Hi All,I am looking for a method to redirect inbound PSTN calls based on the calling party number. I can do this in CUCM 9 or IOS. I find plenty of documentation out there on blocking calls by calling party number but nothing on redirecting. M...
Hey all,I have been asked to locate a wireless phone for use with CUCM that is ATEX 1,21 rated. The 7925EX is only rated 2,22.Anyone have a recomendation?Thanks Jerold
Hey all,I have been asked to locate a wireless phone for use with CUCM that is ATEX 1,21 rated. The 7925EX is only rated 2,22.Anyone have a recomendation?Thanks Jerold
All, Thanks for the help. Turns out the issue was caused by the Firewall team messing with SIP Inspect. Dennis, were right. I left the SDP out of what I had posted here.
Thanks Tere,My thinking was along the same lines as yours. It would need to be done in IOS on our H.323 gateways. I just have not found a way to change the called party number basied on the calling party number. Call Rejects are easy but they also...
Hey everyone thanks for all the help. I seem to have solved it myself. It was much the same as the H.323 issue above, except CallManager had a route for any 5 digit pattern so when an incomplete call came in the last five would match that pattern a...
I see how this would work with a H.323 gateway and I have the Overlap command in. I think the issue may be in that fact that this is a call manager controled gateway (MGCP). We are disconnecting the call before we have a chance to receive the final...
