Hi all,When I check the output for the command "show environment temperature all" I see high temperatures reading, is this ok ?? router#show environment temperature all module 1 outlet temperature: 53C module 1 inlet temperature: 34C module 2 out...
Hi afrahmad, this command only gave me the temperature for module 6, and is the same than previous command router#show environment temperature rp 1router#show environment temperature rp 2router#show environment temperature rp 3router#show environmen...
I have the same problem with a 7606 router here is the output:system power redundancy mode = redundantsystem power redundancy operationally = non-redundantsystem power total = 2669.10 Watts (63.55 Amps @ 42V)system power used = 615.30 Watts...