About davidoates

davidoates · 10-19-2016

This may have been answered, but I have not been able to find anything searching the forums. I would like to setup the following scenario, but have not been able to figure this out. We have a shared wireless network of some corporate laptops and non...

davidoates · 02-03-2012

Having problems with our TelePresence Intergrator C40. I wasn't present for the change, but another tech changed the IP, GW, etc and rebooted through the web interface. Once it rebooted it never came back up. Connecting to the codec serial port I get...

davidoates · 10-03-2007

Trying to change an internal numbers caller ID so an outside phone can see the full 10 digits. I am translating the 4 digit number coming in on the DID to a different internal number, but want to convert it outbound to the full 10 digit number. Anyon...

davidoates · 10-01-2007

Here is my dilema, may be a simple fix or solution:Running CallManager 3.3(5)sr2a (man we need to upgrade) and we have a remote gateway with a DID coming into it. The telco is passing the last 4 digits to us, we are translating these to an internal n...

davidoates · 09-14-2004

Trying to force certain dial-peers to use a different codec. The following config we have setup in a lab. 2 MC3810's. 2 phones. Simulated WAN circuit using a serial cable between the 3810's with a DLCI of 231.Router A:dial-peer voice 1 pots desti...

davidoates · 10-21-2016

Thanks for info Marvin, I'll look into those options.

Member Since	‎09-14-2004 10:49 AM
Date Last Visited	‎09-26-2018 08:40 AM
Posts	6

User Statistics

User Activity

Cisco ASA 5500 with 9.x Hairpinning (U-turn) with AnyConnect issue

C40 not booting

Translation pattern on CallManager 3.3(5)

DID, CallManager, and Translation Patterns

Codec problems

Thanks for info Marvin, I'll