About bapatsubodh

bapatsubodh · 09-26-2015

Hi,On Cisco switch-series 6800, what is the default policy for QsS on incoming packets on L3 links. Does the "switch" trusts the existing DSCP marking or we need to configure "mls trust" separately on each L3 interface to trust DSCP.Any link on cisco...

bapatsubodh · 06-18-2015

Hi,We have IBGP and OSPF running on a router.Learning default route via IBGP and also getting installed in the routing table.sh ip routeB* 0.0.0.0/0 [200/0] via *.*.*.*, -----------------------> Default route getting installed in routing table ...

bapatsubodh · 11-17-2014

Hi,In the case, when Light weight AP is broadcasting more than one SSID ( with WLC is configured with associated VLAN interface) how does the WLC differentiates DHCP requests those are coming from different SSID before forwarding to DHCP server?Doe...

bapatsubodh · 05-14-2014

Hi,If we connect a FEX device to 2 X 6004 Nexus switches with uplinks to each 6004 with VPC as compared to a Cisco L3/L2 switch connected to 2 X 6004 Nexus with trunked-uplinks to each 6004 with VPC, what could be the impact on network speed performa...

bapatsubodh · 05-14-2014

Hi,If we connect a FEX device to 2 X 6004 Nexus switches with uplinks to each 6004 with VPC as compared to a Cisco L3/L2 switch connected to 2 X 6004 Nexus with trunked-uplinks to each 6004 with VPC, what could be the impact on network speed performa...

bapatsubodh · 06-19-2015

Thanks Rick as Jon said redis-internal command is working!In the future we need to check some prefixes other than just the default, hence the conditional route-map is configured. Thanks for help! subodh

bapatsubodh · 06-19-2015

JonThanks for your replay!!It is working once this redis. command was in. But I thought we'wd need it only when we redis between two routing protocols one of which is BGP. On this router default-prefix is coming from IBGP peer admin dist (200).Simila...

bapatsubodh · 06-19-2015

Earl, Thanks for reply. There is no redistribution between IBGP and OSPF. OSPF process is used to generate default-route for OSPF cloud and this router is the exit point.Similar configuration is working when BGP is "external-BGP" and not IBGP. Not su...

bapatsubodh · 11-18-2014

Hi, Thanks for the Information Rasika.MAC address table (SSID <--> mac-address-of the user's PC) can decide which SSID user has joined then WLC can follow the normal process. Thanks,Subodh

bapatsubodh · 06-19-2014

Deepak,As Rick explained you can tune the routing by different methods. Also CEF load-balancing per packet can be useful Rick's earlier post explains the same. So in short, theoretically if you have many sources to many destinations per packet load b...

Member Since	‎10-25-2005 09:39 AM
Date Last Visited	‎08-21-2018 12:07 PM
Posts	600
Total Helpful Votes Received	14

User Statistics

User Activity

QoS for 6800

OSPF default route injection

WLC DHCP request

Nexus - FEX performance

Nexus - FEX performance

Thanks Rick as Jon said redis

JonThanks for your replay!!It

Earl, Thanks for reply. There

Hi, Thanks for the

Deepak,As Rick explained you