About d-fillmore

d-fillmore · 05-31-2022

Hi, If migrating from a design where a load of WAN circuits terminate directly on a router to one where the WAN circuits physically terminate on a vPC pair (9300) but logically terminate on a vPC on the router, what are my options for fast peer failu...

d-fillmore · 06-05-2020

Hi, I'm want to use the 'genie diff' feature to compare the routing tables of multiple devices between snapshots.The routing domain I'm interested in is on the global VRF on some devices and in a VRF on others. I'd hoped that I could specify the VRF ...

d-fillmore · 03-24-2020

Hi, I need to change the System MTU on a 3850 to the maximum value - 9198. I will have a client facing SVI also set to 9198, but then I need a service provider facing SVI to be 9000, as the service provider MTU is set to 9000 and we are running OSPF ...

d-fillmore · 10-03-2016

Hi, I have 22 Nexus 9Ks that I've just upgraded to 7.0(3)I4 so I can use the REST API. I'm using vRealize Orchestrator for automation, and I can't access the REST API on the Nexus using Orchestrator as the certificates have all expired. I can't find ...

d-fillmore · 05-19-2016

Am just posting this here as I found some different symptoms that were fixed by the workaround for this bug in case anyone else is getting them. I suspect it''s the same bug as I think the debugs were complaining about Opaque LSAs I've seen this bug ...

d-fillmore · 06-01-2022

In the diagram, R1 and R2 will run BGP with each CPE over a common VLAN/subnet. From the 9Ks, the ports connecting to R1 & R2 are in a vPC so the VLAN is considered a vPC VLAN. The ports connecting the 9Ks to the CPEs are considered orphan ports...

d-fillmore · 05-31-2022

A router connected into a pair of 9Ks w/routed sub interfaces on a port channel. WAN circuits and routers connected into each 9K (non-vPC) in a common peering VLAN. Decoupling the physical and logical termination has caused this issue which I don't ...

d-fillmore · 06-08-2020

Thanks!

d-fillmore · 03-24-2020

Thanks, I guess the most important question is, If I set the SVI MTU to 9000, and want to form an OSPF adjacency with something running 9000 as well, will the device use the System MTU when forming the OSPF adjacency, or the MTU that's configured on ...

d-fillmore · 03-24-2020

For L2 yes, but is different MTU for L3 SVIs supported?

Member Since	‎02-10-2003 07:03 AM
Date Last Visited	‎06-14-2022 07:45 AM
Posts	218
Total Helpful Votes Received	24

User Statistics

User Activity

Options for fast peer failure detection with vPC and orphan ports

How can I create and diff snapshots in different VRFs

CAT3850 - Can I configure a different MTU on an SVI to the System MTU?

Can I generate self signed certificates for Nexus 9K?

ASAv - OSPF adjacencies dropping, possibly CSCut01395 with different symptoms

Re: Options for fast peer failure detection with vPC and orphan ports

Re: Options for fast peer failure detection with vPC and orphan ports

Re: How can I create and diff snapshots in different VRFs

Re: CAT3850 - Can I configure a different MTU on an SVI to the System MTU?

Re: CAT3850 - Can I configure a different MTU on an SVI to the System MTU?