Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
peter.jevos
Level 1
Level 1
Member since ‎08-08-2012
‎08-18-2017
Recent Badges
Awards

User Statistics

  • 13 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received

User Activity

High CPU when tranferring data between VLANs on the same subinterface

05-05-2014
Hi i have Cisco 2821 with 2 subinterfaces on the G0/0, with 2 different VLANs on them.When i copy about 60 Mb/s between them, the CPU usage increase to 80-90 %, and start to drop the packets.The CEF is on on all those subinterfaces.Any recommendation...

How to define conditional NAT on ASA 9.0

08-23-2013
Hi ,I have to migraste current IOS conditional NAT to our new ASA 5515x.However the NAT misses the possibility to define it via access lists.I've found something about the twice NAT, however i didn't find the way how to implement it.Here is the curre...

Anyconnect 3.0 & "Your client certificate will be used for authentication" message

02-01-2013
Hi I'm running Anyconnect 3.0 with user certificate, however I'd like to get rid of the annoying message everytime i'm loggingWhen i connect to ASA i get :1.  Your client certificate will be used for authentication - and i have to confirm the Group f...

Problem to obtain startup-config under privilege level

12-12-2012
hi guysI'm using IOS 15.2 and under this version i cannot obtain the startup-config under certain privilege level ( in this case it is 7 )i have no problem to get it from the earlier version, also from 15.1Router#sh privilCurrent privilege level is 7...

SSL Anyconnect client and the access lists

11-19-2012
Hi I deployed Anyconnect 3.0 on our ASA 8.4. I have created several VPN profiles with different ip pools. However it's quite unknow for me how can i apply the ACl for this particulat ip pools.If i applied the ACL on the INSIDE interface , they don;t ...
Community Statistics
Member Since ‎08-08-2012 05:22 AM
Date Last Visited ‎08-18-2017 04:00 AM
Posts 13