Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Thanks for your question Sarah. The number of Dynamic vNICs can be modified by changing the Dynamic vNIC Connection Policy located under the LAN tab. However, this is a disruptive change that requires a reboot on all the hosts that the Dynamic vNIC C...
Hello Tenaro,Thanks for asking these good questions.Q. Is VM-FEX feature supported only all mezzanine cards, or to be more precise does it work for cards like M81KR or 82598KR-CI? BTW, is Cisco still manufacturing non dynamic interface type mezzanine...
Samdeep, UCS can be directly connected with the storage array, however any Non-UCS server will not be able to access the array via fabric Interconnect. With UCSM 2.1 default zoning has been disabled. and each initiator has to be specifically mapped...
Walter, You can safetly remove the Management firmware package. Before UCSM 2.1 version, there were two different policies for blade upgrade. We had firmware packages to upgrade BIOS, adapter, etc and a Managment firmware package for Blade CIMC up...
Mike,KVM uses port 2068 to communicate over the network, please ensure that the port is allowed over VPN and its is not being blocked by any ACLs or firewalls. You can try to telnet to the server's CIMC address using port 2068 in order to test conne...
