I have a CUCM 12.5 with PUB+SUB coresident and add another SUB on a new server.
Everything if running fine - sets registering and making calls, gateways, et,etc, on second SUB. I would like that, in case of fail of the first server where the PUB+SUB ...
Hi, all!! I have an issue; I migrated and old PBX to the CUCM release 12 and I have this issue from other releases, also.In most of the pbx brands when a user call forward a call (set A to set B) all calls goes to set B and set B is the only one that...
Hi!! I have a gateway with mgcp configured to a CCUM. Everything is working fine but when a reboot is made or a power cut is done the ccm-manager stays down until I do the command "no mgcp" and then "mgcp".My CCUM is 12.5 and my gateway uses 16.11.01...
HI!!
Need your help on this; I have a customer with CUCM 9 that need that a DID rings on a group that after some time rings on set A, then set B and finally on a external mobile set. I tried to create a cti route point but the Hunt group does not fol...
Hi!!
I'm installing CUACA 11 and want to import contatcs to the directory; at this moment the customer has CUCM 12 linked to active directory and the users does not have all the information needed for CUACA to work correctly. So I created a user on...
Yes, security password is the same.
Database replication is ok.
I have both working with sets registered. They are on the same network, so there is no fw in between.
You right, Roger!!
Thanks for your support.
I just want to install the language files and firmware on the second TFTP that is on the subscriber I just add to the previous solution. I want to have a TFTP backup server to work in case the publisher...
Well, for me the first Vm is the publisher, correct, and also makes the call processing, TFTP and everything else; the second is only one subscriber that I add to the first VM (Publisher).
I see, and think now in the wrong way, the first VM as a Publ...
