About Patrick Meyer

Patrick Meyer · 02-11-2015

Hi all,I have some quick question where I can't find a clear answer for:A customer wants to buy a new ASA for a showroom. He wants to connect 30 VPN phones and 60 VPN users, where only 10 of them are concurrently connected. So we would have two choic...

Patrick Meyer · 03-05-2014

Hey guys, I am having trouble with a ISE (1.2 patch5) at a customers site when deploying customized html pages for wireless guest-access. The reason we need to use these customized templates is that the language template for the AUP seems not to supp...

Patrick Meyer · 10-11-2013

Hi, we have a customer which is using a ISE-3315 Hardware appliance running 1.1.4.218 Patch 1. He needed to upgrade to 1.2 Patch 2 to support iOS7. There is no secondary appliance so this is a standalone deployment. We did the upgrade according to Ci...

Patrick Meyer · 03-26-2013

Hi, We have a customer which is using a Cisco WLC 5508 and 3502I APs. As he used the 7.2.103 release, There were no issues with VoWLAN. Now he needed new APs and ordered the 2602I. To use them he needed to upgrade the WLC to a 7.3 or later release. A...

Patrick Meyer · 01-19-2012

Hi Guys, I want to cover an old building where just some cables can be run, so I would use mesh, but I want to use as many APs over wire as possible.Is it possible to have wireless mesh AND non-mesh Access Points to cover the same area? Are there any...

Patrick Meyer · 07-31-2018

Hi, One thing though that I am wondering about: Has there been a plus license installed on this test-system, even if it states the license was not consumed? I wonder if the feature is enabled/ disabled by simply having the license installed, even if ...

Patrick Meyer · 12-20-2017

Hi, Is it just me or is the link not working?

Patrick Meyer · 12-08-2016

I wanted to share my experience as well. I have had one customer who only used one single ISE VM, where Upgrade went straight forward (through CLI) from Version 2.0 to 2.1. Another Customer now, with four Hardware-Nodes (3415) also wanted to upgrade...

Patrick Meyer · 09-13-2016

What I get from the first lines of your macro is that after the event "LINKUP == yes" you first of all do a shutdown... Which triggers the event "LINKUP == no" and everything starts anew. Not sure if this helps but at a customer site I have the actu...

Patrick Meyer · 06-09-2015

I have the AuthZ Profile configured to have the static IP address of the port I connected to my guest VLAN. I am running WLC version 8.0.115.0 and ISE 1.4 and my guest clients are put directly into RUN state on the WLC (policy manager state). I see t...

Member Since	‎09-02-2009 09:42 PM
Date Last Visited	‎05-16-2024 05:50 PM
Posts	42
Total Helpful Votes Received	5

User Statistics

User Activity

Anyconnect 4.0 licensing with ASA-5515-FPWR

ISE access custom-web templates directly

ISE Application won't start after upgrading to 1.2

IP Phone 7921 / 7925 roaming issues after WLC upgrade from Version 7.2 to 7.3 and / or 7.4

Running MESH and non-MESH APs on a single area

Re: Thanks for raising this

Re: Are you new to AMP for Endpoints?

I wanted to share my

What I get from the first

I have the AuthZ Profile