About ljohnsson

ljohnsson · 11-07-2022

HiI'm trying to use the feature in a Cisco Switch that should be able to allocate an IP-address to a client based on what port it connects to (reason is is we have to replace a HW on a specific port the new HW SHALL automatically use the same IP as t...

ljohnsson · 05-20-2008

Hi. We have configured a fax-on-ramp service to send fax as e-mail to our exchange-server. When the service sends the fax to the server the from-address is formatted as "" <username@domain.xx>----from debug----- (C)S: From: "" <fax-in@vxogw02.tdc.s...

ljohnsson · 03-30-2004

We are using adapter teaming in servers, each adapter connected to different switches. When primary adapter/switch fails connection is working via secondary adapter/switch. As soon as the primary switch comes back up the server adapter teaming will f...

ljohnsson · 11-27-2002

Why would a interface operation in FullDuplex mode have to wait to transmitt frames (Deferred counter increases) on a routerinterfaceInterface is configured for 802.1q trunking of only two VLANS

ljohnsson · 11-08-2022

OK, I digged out an old Catalyst 2960 and did the same test there. Worked perfect, so CML and the IOS version there on the switch is really having trouble. Problem solved

ljohnsson · 11-07-2022

So what do you suggest I change to get it working ?

ljohnsson · 11-07-2022

The goal is to have the switch assigning IP-addresses to hosts connection to different ports in the switch, and always assigning the same IP-address to whatever connects to a port based on what port it connects to, so if something connects to port gi...

ljohnsson · 11-07-2022

The switch is in CML running version 15.2 (just to be able to test the functionality easily)Cisco IOS Software, vios_l2 Software (vios_l2-ADVENTERPRISEK9-M), Experimental Version 15.2(20200924:215240) [sweickge-sep24-2020-l2iol-release 135]If I remov...

ljohnsson · 05-26-2008

I've at the moment no access to the Exchange server, but I've attached a screenshot of the message as it appears after sending the FAX via another exchange server. This shows that the message has no 'from' address.

Member Since	‎11-27-2002 01:43 PM
Date Last Visited	‎03-27-2024 12:16 AM
Posts	17
Total Helpful Votes Received	5

User Statistics

User Activity

DHCP Server Port-Based Address Allocation

Fax-on ramp mmoip mail from -address

Linkup /Adapter teaming in servers

Deferred counter on FastEthernet interface Cisco 36xx

Re: DHCP Server Port-Based Address Allocation

Re: DHCP Server Port-Based Address Allocation

Re: DHCP Server Port-Based Address Allocation

Re: DHCP Server Port-Based Address Allocation

Re: Fax-on ramp mmoip mail from -address