nisagar

Please check in the event of vlan UP/DOWN#show mac add dyn vlan 20 Do you see any dynamically learne...

No, u cannot disable this. RegardsNitin

Hi Andy,First upgrade the IOS to 12.2(50)SG, as per the link below:http://www.cisco.com/en/US/prod/c...

Hi Arup,Your need to get your swich replaced as i can see :Writing crashinfo to flash:crashinfo_1993...

Hi,"I only have one stackwise cable, would I still connect it the same way? As I only have one cable...

Hi,Have you checked that if both siwtches have the same IOS ?

Hi,Please Add "ip route 10.45.16.0 255.255.255.0 10.45.32.254" in main site to reach 10.45.16.0/24 n...

Hi,This is up to you really what you want to buy keeping in mind the price, support and scalability ...

Hi,By this output it means you cannot create a L3 port on Fastethernet with "no switchport". Here i ...

Hi,Your ADSL port is an WAN port right ? If you are able to issue "no switchport" on the fastetherne...

Hi,Can you look at "508 Path Code Violations" ? This can be an telco issue as Path code voilation's ...

Hi,Could you share the output of "show proccess cpu sorted".

Hi,You should open a TAC case for this issue as they could analyse the root cause for this issue.

Hi Frank,This is what iam suggesting as per your current hardware you have i.e. VWIC2-1MFT-T1/E1, if...

Hi Frank,No, you do not need this card. You just need an PVDM2 module with your exisiting VWIC2-1MFT...