About thorsten.steffen

thorsten.steffen · 07-24-2020

Hello,does somebody know if live migration of ISE VM running on Hyper-V is supported in Version 2.7?In the installation guide (https://www.cisco.com/c/en/us/td/docs/security/ise/2-7/InstallGuide27/b_ise_InstallationGuide27/b_ise_InstallationGuide27_c...

thorsten.steffen · 10-29-2019

Hi,I use several nexus 5672 with nx-os 7.3(3)N1(1) on which I want to automatically copy some show outputs to a ssh server.For suppressing manual password input to the ssh server I configured passwordless file copy as documented here:https://www.cisc...

thorsten.steffen · 08-22-2019

Hi all,I want to use MSDP to exchange multicast sources between different customer network domains where no BGP is used but OSFP.Each domain uses it's own two rp for redundancy with anycast rp (without msdp meshgroups). Multicast routing protocol is ...

thorsten.steffen · 02-12-2019

Hi, I am looking for report which shows all vrfs in a enterprise network (configured on any cisco switches and routers) and all ip subnets belonging to each of this vrf. Is there a possibility to get this information from a report in prime infrastruc...

thorsten.steffen · 01-25-2019

Hi, I am trying to activate pim sm multicast routing between a firewall cluster (non cisco) and two nexus 5648 (no vpc). Firewall cluster has one ip address (in each zone), nexus use hsrp (in each vrf). Well known multicast problem: firewall drops pi...

thorsten.steffen · 04-13-2021

Hi Greg,what exactly does "application server crashing" mean, is it "just" related to ise application or the complete vm?Does restarting application server via cli solve the problem, or do we have to restart the complete vm?

thorsten.steffen · 07-26-2020

Hi,already read this discussion before but because it's three years ago I hope today there is any further development and new information about that ;-)

thorsten.steffen · 11-08-2019

updated today to 7.3(5)N1(1).Still does not work.I assume that it's maybe not supported on this platform Found two more discussions without solution (for N3K/9K):https://community.cisco.com/t5/other-security-subjects/passwordless-file-copy-and-ssh-to...

thorsten.steffen · 10-31-2019

loglevel was already set to debug3.If I copy keypair from switch to pc and use winscp to login to ssh-server that works fine with the keypair, I'm not prompted to type in a password.

thorsten.steffen · 10-30-2019

SSH Server log is attached, to be honest, I can not read it in detail. Switch (Client) is 10.10.10.100Server is 10.20.20.100ssh username is 'test user' I found the following line:userauth_finish: failure partial=0 next methods="publickey,password" [p...

Member Since	‎01-22-2007 02:41 AM
Date Last Visited	‎04-15-2021 08:56 PM
Posts	225
Total Helpful Votes Received	10

User Statistics

User Activity

Is live migration feature of Hyper-V supported for ISE 2.7 ?

passwordless ssh file copy does not work on nexus 5000 / 5600

Problems using MSDP without BGP

Can I get a vrf report in cisco prime infrastructure 3.40?

How to solve RPF check failure when using HSRP in Nexus56K?

Re: Is live migration feature of Hyper-V supported for ISE 2.7 ?

Re: Is live migration feature of Hyper-V supported for ISE 2.7 ?

Re: passwordless ssh file copy does not work on nexus 5000 / 5600

Re: passwordless ssh file copy does not work on nexus 5000 / 5600

Re: passwordless ssh file copy does not work on nexus 5000 / 5600