About andreas.fuchs

andreas.fuchs · 01-17-2024

Hello guys,we try to access a firepower 1010 (remote office) from our headquater over an ipsec tunnel via ssh.Therefore we configured a loopback interface, which is part of the routing over the vpn, and this loopback is pingeable.Somehow we are not a...

andreas.fuchs · 10-23-2023

Hey guys,I just compared different firepower models 1000 series vs 3000 and I wonder why the 2000 series is missing on the webpage?https://www.cisco.com/site/us/en/products/security/firewalls/index.html Is the 2000 series soon EOL/EOS ? Thanks for yo...

andreas.fuchs · 09-06-2023

Hello guys,we configured BDI interfaces on our ASR 903 and using a Tengig interface for bridge domains....We wonder which speed the BDI interfaces use?Bandwith parameter shows 1000000 Kbit/sec . but this I think is important for overlaying protocols ...

andreas.fuchs · 03-14-2022

Hey guys,we have one customer with an active VTPv3 domain...Two C4500x cores as "primary" and some access switches as "clients".I need to add a new vlan and receive: Root(config)#vlan 21VTP VLAN configuration not allowed when device is not the primar...

andreas.fuchs · 06-04-2013

Hi all,I have a voice gateway and some phones connected to the same switch. The problem is: The voice gateway doesn't tag his packets for QoS, the phones do it automatically.Switch-HW: C3750-24TS-S1UVersion: IPBASEK9_12.2(55)SE4Qos is enabled and rew...

andreas.fuchs · 10-23-2023

Ok thanks, any idea why its not "offered" via the portfolio website page?

andreas.fuchs · 09-06-2023

Thanks guys, just wanted to confirm if my thoughts are correct. Cheers

andreas.fuchs · 09-06-2023

#sh int TenGigabitEthernet0/0/0TenGigabitEthernet0/0/0 is up, line protocol is upHardware is A900-IMA2Z, address is acf5.e628.2d00 (bia acf5.e628.2d00)Description: connect wan nekwn1wansw01 1/4MTU 1500 bytes, BW 10000000 Kbit/sec, DLY 10 usec,reliabi...

andreas.fuchs · 03-15-2022

Thank you Paul thats the info I needed...Appreciated

andreas.fuchs · 03-14-2022

Hi BB,yes I'm on the VTP Server and I just need to know if I need to do it in a maintenance window in case the command "vtp primary vlan" will force network interrupts??My tasks would be:1. Make the "vtp server" to primary vtp server -> "vtp primary ...

Member Since	‎06-04-2013 06:35 AM
Date Last Visited	‎01-17-2024 06:18 AM
Posts	10
Total Helpful Votes Received	1

User Statistics

User Activity

SSH access to firepower 1010 via loopback

Firepower 2100 series missing in portfolio

ASR 903 BDI interface speed

VTPv3 domain - Activate Primary Server

mls qos rewrite & mls qos trust on the same switch possible?

Re: Firepower 2100 series missing in portfolio

Re: ASR 903 BDI interface speed

Re: ASR 903 BDI interface speed

Re: VTPv3 domain - Activate Primary Server

Re: VTPv3 domain - Activate Primary Server