Hi all, I tried to upgrade IOS on WS-C2960G-24TC-L  from c2960-lanbasek9-mz.150-2.SE10 to c2960s-universalk9-mz.150-2.SE10. For some reason the boot failed and generated the following error: Loading "flash:c2960s-universalk9-mz.150-2.SE10.bin"...Bo...

Hi,I was configuring NAT onto the following interface (router Cisco 881)interface Dialer0 ip address negotiated ip mtu 1492 ip virtual-reassembly encapsulation ppp load-interval 30 dialer pool 1 dialer-group 1but everytime i enter the "ip nat outside...