About Anatoly Fedchik

Anatoly Fedchik · 04-10-2014

Hello, i have just installed the AnyConnect Mobile license over demo SecPlus license and performed the reboot(soft reboot with reload command). And now i still have 39 days for AnyConnect Mobile License... when it shoud be perpetual. That is the...

Anatoly Fedchik · 12-16-2013

Hello,Help me pls, I'm trying configuring CUPC in the Deskphone mode but with no success. The Softmode is ok (no errors). CUPC - Server status and notifications:CUCM IP Address - 172.16.x.xPort - 2748Protocol - QBEStatus - connecting (it remains on c...

Anatoly Fedchik · 06-04-2013

Hello, help me pls, how can be disabled "stop-on-failure" feature on Cisco AP2600.Thank you in advance

Anatoly Fedchik · 04-05-2013

Hello, Something strange with nat command the following nat command excellent works on ASA 8.4(2) but fails on ASA 8.4(4):nat (dmz,any) source static dmz_srv pub_srvI perform clear xlate, shutdown interface dmz but with no success. p.s. i have cha...

Anatoly Fedchik · 02-05-2013

Hello,Could you help me, according to cisco manual in order to change SDM template i need to reboot switch, but when i have C3750-X stack do i need to reboot stack or maybe will be enough reboot in sequence the stack members?Thanks in advance

Anatoly Fedchik · 09-30-2016

for info: The name field in ip gateway definition in MS Exchange 2016 must contains the ip address of the CUCM. Otherwise, an error - ms-diagnostics-public: 15602;source="EXCH-01.test.com";reason="The Unified Messaging server is not authorized to ac...

Anatoly Fedchik · 06-04-2013

No, I dont perform debug, I just want to disable the feature if it possible. I need the radio interface will be restarted if it needed.interface d0 - 2,4GHz - station-role repeaterlog:%DOT11-2-RESET_RADIO: Restarting Radio interface Dot11Radio0 d...

Anatoly Fedchik · 04-12-2013

The problem was in routing on the host(dmz_srv). The ASA config was ok.Thanks Jouni for your help.

Anatoly Fedchik · 04-05-2013

I have lab with the same config but on ASA 8.4(2) and in this lab everything is ok, but in production when i changed nat(dmz,outside) to nat(dmz,any) i cant access the dmz host by public ip from inside interface, at the same time in lab it works.I h...

Anatoly Fedchik · 02-06-2013

Thank you, I thought that I should restart all stack but I had hoped

Member Since	‎12-29-2004 09:47 PM
Date Last Visited	‎06-26-2020 12:54 PM
Posts	62
Total Helpful Votes Received	10

User Statistics

User Activity

License install problem ASA

CUPC 8.6 deskphone mode

how disable stop-on-failure

nat (dmz, any) problem 8.4(2)

Change SDM Template C3750 Stack

The name field in ip gateway

how disable stop-on-failure

nat (dmz, any) problem 8.4(2)

nat (dmz, any) problem 8.4(2)

Re: Change SDM Template C3750 Stack