I am unable to login to Jabber MRA in Multi-tenant Expressway setup. I have one expressway cluster of two nodes and two single expressway C to customer 1 and customer 2 respectively. Both MRA zones to customer 1 and 2 are active.The issue that I have...
Hi,
Problem: IM and Presence 11.0 Configuration validation failed.
Background:
Upgraded cucm 8.6.2 to 11.0.1 successfully.
Decommissioned old CUP server by deleting application sever. I am now trying to configure IMP 11.0.1 on CUCM as follows:
1. Sys...
I'm having four branches in multi-site deployement, all registered to HQ running cucm 8.6. I'm about to install another branch which will also register to HQ. The DN's for this branch begin with 0, e.g 0000 as a main DN then 0001,0002-0299. In my cou...
I'm having four branches in multi-site deployement, all registered to HQ running cucm 8.6. I'm about to install another branch which will also register to HQ. The DN's for this branch begin with 0, e.g 0000 as a main DN then 0001,0002-0299. In my cou...
CME 9.5Phone firmware SCCP6945.9-3-1-3.*May 10 08:30:27.611: TFTP: Server request for port 36884, socket_id 0x284ED50 for process 303*May 10 08:30:27.611: TFTP: read request from host 10.186.149.8(36884) via GigabitEthernet0/0*May 10 08:30:27.611: TF...
Hi,
I have scheduled downtime for today to change the security password. This is the 3rd upgrade done on the cluster and there was no attempt to a node before since
Will let you know how it goes after security password change.
Hi Ayodeji
I need to copy SIP diversion header and replace "To" field on INVITE header. my client is running CME and service provider SIP Trunk terminates on the same CME gateway with SCCP phones.
Is SIP profile / copylist supported in this scenari...
