Hi I need to generate a trap from tcl to integrate with other tcl scripts that I have in my routers.Here is my scritpCORP #more flash:test.tcl::cisco::eem::event_register_nonenamespace import ::cisco::eem::*namespace import ::cisco::lib::*sys_reqinfo...
Hi all, I need your help to monitor or to see the bandwidth of vlan on switch, I read that this process is with VLAN access maps but I don’t know how. Could you give me one example of configuration? Thanks in advance
I need your help to know why in this tail I see drops when only I have 163kbps from 512kbps availableRR01TMC#sh policy-map inter Multilink1Multilink1 Service-policy output: WAN Class-map: Precedencia3 (match-any) 3893661 packets, 868957186 ...
I think that my version is 1.0 CORP#show event manager version ^% Invalid input detected at '^' marker.CORP#show event manager envi CORP#show event manager environment CORP#I have thousands of routers with this version ...
thanks Joseph, but now I have this errorCORP(config)#event manager directory user policy flash:CORP(config)#event manager policy test.tclCORP(config)#CORP(config)#^ZCORP#event manager run test.tclinvalid command name "sys_reqinfo_snmp_trapvar" wh...
Mi network topology is attached , I don`t have vlan port only two trunks ports, about 30 vlans in this moment, and I need the input rate and output rate of each vlan on the trunks.thanks for your help