Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Just wondering if anyone has successfully implemented a single button Park user BLF & Unpark SD using any of the new Broadworks Call Park Enhancements that have been added to the recent SPA3XX / 5XX firmware loads.I'd like to have an unused line key,...
Hi there,I've been waiting to ask this question, since I knew that there were several other issues in the previous firmware related to boot-time provisioning; I was hoping that the new firmware would address mine, too. No such luck, it seems.I work a...
John,I did a quick search and came across this document:http://www.cisco.com/en/US/docs/voice_ip_comm/csbpvga/ata/administration/guide/ATA_AG_v3_NC-WEB.pdfIt has an entire section devoted to the configuration of the SPA3102 and the SPA8800 for use as...
John,Both the Grandstream Handytone and the SPA112 are what are called "ATA" devices. "ATA" stands for Analogue Terminal (or in some literature, Telephone) Adapter. That's to say that an ATA device converts from an IP-based voice connection to an ana...
I understand that, and honestly, if I had been involved in the design of the provisioning system initially, that's the way that I would have preferred to do it. I wasn't involved in the initial design, however, and now, we have hundreds, if not thous...
Tolli,I have not seen this working with 7.4.8, but only with 7.4.9c. As I mentioned, the trick is that both the "ACD Login" service (from the Phone page), as well as the "SIP B" service (from the SIP page) are disabled, and only the "Broadsoft ACD" s...
Boudewijn,Just thought I'd follow up with you as I've finally figured out how to implement this feature properly in firmware 7.4.9c (and yes, this includes the 525).First off, the SIP-B and ACD Login services both need to be disabled (set to No), whi...
