About STEFAN CHRISTEN

STEFAN CHRISTEN · 04-24-2024

Hi everyoneThe bug status is fixed since April 1 but there is no fixed version listed. Which version will contain the fix? ThanksStefan

STEFAN CHRISTEN · 05-16-2017

Our customer requires that Phone LSCs are verified on Expressway-E when the try to register over MRA. In the MRA Deployment Guide there is only stated that this could be achieved with Mutual TLS. Has anyone implemented that yet? If so, can you please...

STEFAN CHRISTEN · 01-27-2014

Hi everyoneA customer likes to deploy Jabber for Windows 9.6 in phone mode with Windows 8.1 (softphone only, no video required).The installation and configuration guide seems to be a bit confusing.http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/...

STEFAN CHRISTEN · 04-14-2013

Hi everyoneOur customer is having an issue with the language in the CUCILync window.They have all software including Lync installed in English but some user ended up in having a German CUCILync window.As there is no documentation available (or at lea...

STEFAN CHRISTEN · 04-14-2013

Hi everyoneI'm currently struggeling with a FAX connected to an ATA-187 (firmware 9.2.3) dialing to PSTN in SRST (version 9.1, CUCM is also 9.1) mode.The problem is that the ATA is sending the dialed number digit per digit (first invite only contains...

STEFAN CHRISTEN · 02-12-2024

Hi Guillermo This is not possible within the SSM application. You need to use the On-Prem console via SSH and start the backup manually.https://www.cisco.com/c/dam/en_us/buy/smart-accounts/ssm-satellite-enhanced-edition-faqs-2018.pdfSSM On-Prem – Bac...

STEFAN CHRISTEN · 08-31-2016

If you configure a SIP trunk between the CUCM and the gateway instead of H.323 the issue (the TAC engineer never opened a bug for this!) is probably gone. We haven't seen the issue with 10.5(2)SU1 and a SIP trunk with an annunciator to the gateway. ...

STEFAN CHRISTEN · 08-31-2016

Maybe it's SIP to the gateway that fixes the issue

STEFAN CHRISTEN · 08-30-2016

Hi Mohamed We have seen that the issue with SNR no longer exists with SIP gateways and newer CUCM versions. We have seen issues with no-ringback when the external calls are routed to Unity Connetion and then transfered to an internal subscriber. Othe...

STEFAN CHRISTEN · 01-06-2015

Hi KelvinYou are missing 1 release key. You should have received 2 LIC-SW-EXP-K9. Usually the 2nd PAK is on the second page of the PDF.For the LIC-EXP-E-PAK you should register for the following options one on each Expressway:- LIC-EXP-SERIES- LIC-EX...

Member Since	‎10-26-2004 03:13 AM
Date Last Visited	‎04-24-2024 07:05 AM
Posts	135
Total Helpful Votes Received	40

User Statistics

User Activity

CSCwj38773 - IE9310 - Switch View does not work

Verify Phone LSC for MRA on Expressway

Jabber for Windows 9.6 softphone support on Windows 8.1

CUCILync language settings

Dial Issue on ATA-187 in SRST mode

Re: SSM On-Prem schedule backup

If you configure a SIP trunk

Maybe it's SIP to the gateway

Hi Mohamed

Hi KelvinYou are missing 1