Hello Rick,The 4500-x is a catalyst switch and it does not support ipsec tunnel termination. You need a router for ipsec tunnel termination.

Hi Paul,You cannot use a ssh client to connect to the telnet service of vmware.You need to set the ip address of the serial console within the vmkernel interface subnet.It is normal behaviour that you see the Booting IOS-XRv message on the console (n...

Hello Paul,You need to add a serial console to the VM. If you perform some googling there are some blogs around that show you how to configure it and access the serial console.It is normal behavior that the console is on "Booting IOS XRv".Hope this w...

The assignment window is what you are allowed to give to your customers without permission from your RIR.

Thanks a lot 'no vstack' disables the tcp port..