Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I am looking for ways to avoid deleting files from the flash in a Switch 2960, I found some scripts TCL / EEM but this switch does not support EEM (IOS c2960-lanbasek9-mz.122-58.SE2.bin). someone has an idea how to do this?. thank you very muc...
ok, Therefore the switch should be to: service config boot network tftp ://1.1.1.1/config-defaultconfig-default file would have all the settings for the Switch to always tell users to validate the AAA and not authorize the write erase command and de...
OK, but as to the condition that if they do an erase startup-config on the switch 2960, go to find the TFTP configuration file default.I can have the Switch validated in AAA with a user without access to the delete command, but that will occur when a...
correctwhen using EEM I have applet that prevents view or delete anything related to EEM: event manager applet-event no-NO event cli pattern "no event manager" sync no skip yes action 1.0 syslog msg "Not Allowed" exit event manager applet-event no...
right, The Switch is a laboratory where the practice of CCNA and CCNP, and there are times that some students "malicious" erase the IOS switch and reset the machines. In 3560 switches achieve reverse by using EEM but for 2960 there is nothing similar...
