About t_scholem

t_scholem · 02-02-2020

Hello,I have a RV320 that is sitting between 2 different routers/access points on my network. Essentially:My ISP's router/access point <-----> RV320 <-----> My other access pointI want clients connected to each access point to be able to talk to each...

t_scholem · 04-21-2015

I have a RV042 at home and I've got a RV320 for my office, since I thought it was just an upgrade.On my old RV042 I have the ability to configure a Gateway-to-Gateway VPN while both sites are configured to Dynamic IP. To my surprise, on my new RV320 ...

t_scholem · 02-04-2020

Thanks for your reply @pieterh. My ISP router creates a 192.168.2.0/24 subnet. This is the same subnet used by my other access point, behind RV320. This network is created on RV320 but as I mentioned, just LAN ports are used.In your solution, should ...

t_scholem · 04-24-2015

I'm trying it, but still not working. Do I need reverse zone for "IP by DNS resolved" to work?Should I use the same configuration on both site and remote routers?

t_scholem · 04-22-2015

I tried that, and while it's possible, it's not feasible to depend on manual update on such a SMB router.By the way, after everything is set, my RV042 displays a "Connect" button under "Tunnel Test", which triggers the connection to be established. S...

t_scholem · 04-21-2015

+1 Feature Request:Ability to create Gateway-to-Gateway with both sides using Dynamic IP. That used to be supported on RV042, but it's not present on RV320. Makes me wonder why!

Member Since	‎01-20-2015 12:44 PM
Date Last Visited	‎02-05-2020 12:25 AM
Posts	7

User Statistics

User Activity

RV320 router between 2 access points

RV320 Gateway-to-Gateway using Dynamic IP on both sides [feature request?]

Re: RV320 router between 2 access points

I'm trying it, but still not

I tried that, and while it's

+1 Feature Request:Ability to