I'd like to access my Cisco 881 router from the internet using Dyndns, but I'm having some issues.
I configured Dyndns successfully on the router, it is sending its ip address to the dns server time to time as it should. However I can't ping the domain name that I registered, the PC is seeing the correct IP address however there is no response coming back. Establish an SSH session is also not possible.
Pinging ntsz.ddnsking.com [100.102.66.47] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out.
3g(config-if)#do sh int di1 Dialer1 is up, line protocol is up (spoofing) Hardware is Unknown Description: 3g access Internet address is 100.102.66.47/32
I believe something trivial is missing from my config but I'm unable to determine what it is.
Below my current config:
hostname 3g ! boot-start-marker boot system flash c880data-universalk9-mz.154-3.M10.bin boot-end-marker ! ! ! no aaa new-model memory-size iomem 10 ! ! ! ! ! ! ! ! ! ! ! ! ! ip dhcp pool dhcp_pool import all network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 126.96.36.199 ! ! ! ip name-server 188.8.131.52 ip name-server 184.108.40.206 ip ddns update method myupdate HTTP add http://.............@dynupdate.no-ip.com/nic/update?hostname=ntsz.ddnsking.com&myip=<a> interval maximum 1 0 0 0 interval minimum 0 0 10 0 ! ip cef no ipv6 cef ! ! chat-script hspa-R7 "" "AT!SCACT=1,1" TIMEOUT 60 "OK" chat-script 3G "" "ATDT*99#" TIMEOUT 60 "CONNECT" chat-script gsm "" "atdt*98*1#" TIMEOUT 180 "CONNECT" cts logging verbose license udi pid C881G+7-K9 sn FCZ1709C052 license boot module c880-data level advsecurity ! ! ! ! ! ! ! controller Cellular 0 gsm sim authenticate 0 3767 slot 0 ! ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 no ip address ! interface FastEthernet4 no ip address shutdown duplex auto speed auto ! interface Cellular0 ip address negotiated ip mtu 1452 ip nat outside ip virtual-reassembly in encapsulation slip dialer in-band dialer pool-member 1 dialer idle-timeout 1 dialer-group 1 ! interface Vlan1 description LAN ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly in ! interface Dialer1 description 3g access ip ddns update hostname ntsz.ddnsking.com ip ddns update myupdate ip address negotiated ip mtu 1452 ip nat outside ip virtual-reassembly in encapsulation slip load-interval 30 dialer pool 1 dialer idle-timeout 0 dialer string hspa-R7 dialer persistent dialer-group 1 ! ip forward-protocol nd no ip http server no ip http secure-server ! ip dns server ip nat inside source list 1 interface Dialer1 overload ip route 0.0.0.0 0.0.0.0 Dialer1 ip route 220.127.116.11 255.255.255.255 Dialer1 ip ssh version 2 ! ip access-list extended allow permit ip any any ! ip sla 1 icmp-echo 18.104.22.168 source-interface Dialer1 threshold 1000 timeout 1000 frequency 1 ip sla schedule 1 life forever start-time now dialer-list 1 protocol ip permit ! access-list 1 permit 192.168.1.0 0.0.0.255 ! vstack ! line con 0 no modem enable line aux 0 line 3 exec-timeout 0 0 script dialer hspa-R7 modem InOut no exec transport input all rxspeed 21600000 txspeed 5760000 line vty 0 4 login transport input telnet ssh ! ntp server hu.pool.ntp.org ! end
Can someone please help me with this?
Thank you in advance.
... View more
Hi All, I have the following problem: I have a script, that integrates with an external DB, where I'm making some parameter changes and at the end I get an intiger back from DB. This intiger is converted to a prompt and played out by the script. My problem is, that the number is 8 digit long and I would like play it out in 4 part. Every part would contain 2 digits. I write an example just to make it clear what I want: I get the following number from the DB: 12345678. I want to play it out in format 12, 34, 56, 78 not in 12345678. Any help would be appreciated again! :) Cheers, Attila
... View more
Hi Guys, I have just tested, what Cliff has suggested and it solved my problem. I put an additional "Call Unhold" just before the play prompt statement and the hold music was stopped and the prompt was played out. I'm not familiar how this discussions are working, but I have another problem. Can I ask it here, or I should open a new one. Anyway, I write my question and I would copy it to a new discussion in worst case. :) This script works with an external DB, where I'm making some parameter changes and at the end I get an intiger back to from DB. This intiger is converted to a prompt and played out by the script. My problem is, that the number is 8 digit long and I would like play it out in 4 part. Every part would contain 2 digit. I write an example just to make it clear what I want. I get the following number from the DB: 12345678. I want to play it out in format 12, 34, 56, 78 not in 12345678. Thank's guys! Cheers, Attila
... View more
Hi Tony, I have attached the current version of the script. (I had to change the file format to .txt from .aef, because .aef files can't be uploaede.) I made some test with reactive script mode and I could see, that the play prompt step was hit, but I couldn't hear it, because I was hearing the hold music and my call was transfered directly to the agent. Cheers, Attila
... View more
Hi All, We have to create a script, that is playing a prompt before it is connecting to an agent. Our script is working fine, if there is at least 1 free agent, but in case the there are no free agents and the call gets queued the prompt is not played before passing the call to the agent. The script looks as following: select resource selected play prompt connect connected end failed goto start_of_queue queued label start_of_queue Call hold Delay Call unhold Goto start_of_queue Any help would be appreciated! Cheers, Attila
... View more