Good that you get it done! :)Sent from Cisco Technical Support iPad App

For the above you will still have to create bvi on ASR1K and map the subinterface with the bvi on the same bridge domain/groupThanks Ahmed MoshrefSent from Cisco Technical Support iPad App

There is alots of things to do for this easier and simplerHowever for you setup to work you need From 3750 to pass tagged you shall configure int to 9k as trunkAnd put the IP address under interface vlan2 also create vlan 2 on switchYou wil have to d...

From the A9K you are matching on Tag 2 that is not tagged from 1K or switchSent from Cisco Technical Support iPad App

1) Do Thyphoon linecards and the new RSP440 require PEM V2? No 2) Can I upgrade PEM V1 to PEM V2 on an old ASR9010 chassis that came with PEM V1?  you have to use Chassis V2 , it have 8 slots for power not 6 PN: ASR-9010-AC-V2 or ASR-9010-DC-V2 You ...