About seandonnelly

seandonnelly · 06-05-2013

I have a Cisco SG500-52P along with an older SGE-2010P, am I correct that in order to stack they must be the same series?

seandonnelly · 05-16-2012

OK I have a RV180 that I'm having some issues with access rules and the one to one NAT.What I have is very basic in regards to needs. Internet outbound is flowing just fine.I have an FTP server that is not using the WAN interface for the public IP, s...

seandonnelly · 04-09-2012

Just recently purchased an RVS4000 to take the place of an old NetGear FVS336, which supported multiple NAT translations. It appears that the RVS4000 does not support this, any other models in the small business line support this? I only need this fo...

seandonnelly · 05-17-2012

Pefect thank you so much for the response, this is what i needed!

seandonnelly · 05-17-2012

If I create a one-to-one NAT for a specific internal IP that system is unable to access the web, only internal network functions. I then need to clear out that entry and reboot the device to allow the internal system access to the intenet again. I mu...

seandonnelly · 04-19-2012

Thanks for this and will take a look into that model, much cheaper than the 800 series I had been looking at!

seandonnelly · 04-18-2012

After that nothing out of the ordinary acl's and really nothing more.

Member Since	‎04-09-2012 01:24 PM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	8

User Statistics

User Activity

Stacking requirements

RV180 Access Rules and NAT

RVS4000 and NAT

Re: RV180 Access Rules and NAT

Re: RV180 Access Rules and NAT

RVS4000 and NAT

RVS4000 and NAT