About jaime.garcia

jaime.garcia · 06-05-2013

I currently have 12 remote offices, which all have a Cisco 2921 H.323 gateway. All offices use the centralized CUCM 8.5.1 cluster that is in Chicago.All offices have a 20Mb SIP Ethernet loop to the MPLS network. We are not using PRI's or T1s. On o...

jaime.garcia · 05-28-2013

I currently have 14 US offices connected via MPLS. We have recently opened a new office in Ottawa Canada. Our primary US MPLS carrier cannot provide services in Canada. I currently have a site to site tunnel setup between Ottawa (Internet circuit)...

jaime.garcia · 09-18-2012

I am adding an additional node to my CUCM 8.5.1 cluster and I am getting the following error:Configuration validation with ag-ccm1 (10.200.1.4) failed. Configured first node ag-ccm1 is not a first node.I currently only have a 2 server cluster and I a...

jaime.garcia · 08-02-2011

Problem:Staff members that currently work from home are experiencing the issue below. They have 7962 IP phones at home that connect to CUCM 7.1.3 at the main site.Home routers 871w are single vlan with an easy vpn to the ASA firewall.For the last two...

jaime.garcia · 03-25-2011

Recently upgraded to CUCM 7.1 and CUP 8.5 I created a CSF devices manually and was successful upon testing within CUCM and CUP.So I exported the device using BAT all details.I renamed the fields appropriately to indicate new users within the expo...

jaime.garcia · 05-30-2013

mfurnival & jcarvaja - I apprecaite both of your help. It all makes sense. I will be implementing in about 2 weeks. I will let you guys know how it goes.Thanks,Jaime

jaime.garcia · 05-29-2013

Thanks for the help. I think if I redistribute from BGP into OSPF on both Chicago routers I should be good to go. My Chicago office and remote offices use a network based firewall provided by Windstream. I currently have a 20Mb Internet circuit in...

jaime.garcia · 05-29-2013

The new carrier is only going to connect with Ottawa and Chicago. So Chicago will have two routers (one to each carrier). We are using OSPF internally between the Chicago router and 6509. We are using BGP between Chicago and the primary carrier. ...

jaime.garcia · 09-18-2012

Hi Chris,Yes I did. I also have the available license for the node. DNS is also working. I added the same DNS servers to the new node that the publisher is using. I also created entries in DNS for the new node. Jaime

jaime.garcia · 01-23-2012

Sean,To resolve the issue, we implemented IP SLA's on the 871 to send an icmp packet to the gateway, always keeping a sa with the voice network:ip sla 10icmp-echo 192.168.1.1 source-interface Vlan1ip sla schedule 10 life forever start-time nowAdd mu...

Member Since	‎03-11-2010 09:23 AM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	49

User Statistics

User Activity

Convert internal Call from 10 digit to 4 digit

Sharing routes between carriers using BGP

Issues adding additional node to CUCM 8.5.1 cluster

One Way audio problem with 871w

Issues using BAT when adding CSF devices

Sharing routes between carriers using BGP

Sharing routes between carriers using BGP

Sharing routes between carriers using BGP

Issues adding additional node to CUCM 8.5.1 cluster

EasyVPN 871 and ASA5510 Audio Issues with 7961