Hi,
we have a strange issue.
We are company, which are located in several countries. For all outgoing calls, we are using one Sip-Gateway which is located in Israel.
Now we have the following issue.
1. We call a mobile number which is located in UK...
Hi all,
I did do a QSIG connection from a Cisco 2921 and a Siemens Hipath. All calls from the Siemens were transmitted over this QSIG . This QSIG connection was working without any issues. Without any configuration change, the Siemens devices behin...
Hi all, I have a problem regarding PBR on a Cisco 4500-X. I`d like to configure a source routing from the IP address 192.168.217.52 over the address 192.168.211.6 instead of the "normal" default route (192.168.200.50). Therefore I configured the fol...
Hi all,I have a Cisco ISE server, which is installed on a VMWare plattform. On the ISE server, I configured 2 network cards. One for the Corporate network ( Gigabit Ethernet 0) and one for the Guests (Gigabit Ethernet 1). Because I had problems, I pu...
Hi,we have a Domain Integrated Safeword application, which was installed on our Domain Controller. Safeword requests were send over the Radius Port to the NPS server, and from there over Port 5040 to the Safeword application. This works without any p...
Hi Mohammed,
apologize for that.
Again all logs. I was able to find the call on the RTMT Log (13:37:55), therefore I hope you will see all necessary information.
Thanks in advance!
Frank
Frank
Hi Mohammed,
here are the logs from the gateway.Can you tell me which Call Manager Logs you exactly want? I think from the RTMT, but here you also have many options.
T&R
Frank
