About mtiger

mtiger · 03-05-2016

Hi , I have UCSC240M4S need to be managed by Cisco Prime Network 4.2.2 Cisco Prime Network TAC engineer say UCSC240M4S CIMC SSH response too slow. I using SecureCRT and putty to connect CIMC IP. it need about 9 - 15 seconds to prompt "Login as:" ...

mtiger · 08-06-2015

Hi , I enable netflow on ASR9K, I also enable bgp on this router.but I do not have bgp as information on the netflow record. IPV4SrcAddr IPV4DstAddr L4SrcPort L4DestPort BGPDstOrigAS BGPSrcOrigAS BGPNextHopV4 IPV4DstPrfxLen IPV4SrcPr...

mtiger · 06-25-2015

Hi , I have some question about ASR9K MOD80 LineCard : 1. What is the max performance ? 80Gbps. Does it means 40Gbps in + 40Gbps out = 80Gbps or it means 80Gbps in + 80Gbps out ? That is , if I have MPA -4X10GE *2 in MOD80. I can...

mtiger · 11-27-2013

Hi,ON ONS DWDM CTC, I can get the utilization on card view -> Performance -> Payload PM ->Utilization.But for the line card MXP_MR_10DME, it does not have utilization mib (SNMP). it has RMON mib.My question is How to calculate the Fiber Channel ut...

mtiger · 06-06-2013

I use VPLS BGP signaling and Auto discovery on ASR1006 .Show bridge-domain to find the mac address table.it shows strange number , for exaple vfi1.1020011. vfi1 is the VFI name. But where is the 1020011 come from ?How to know it associate with BG...

mtiger · 08-09-2015

Thanks! the AS number is correct now!

mtiger · 06-28-2015

Hi Alexander, Thanks for your answer.I just want to verify45Mpps @ 60Gbps( for each direction).Does that mean A NPU concurrent can do 45Mpps (IN) +45Mpps (OUT) = 90Mpps?orMOD80 can be linerate (@128byte) for total 8 port 10GE , 80G in + 80G ...

mtiger · 04-15-2012

Hi , It still do not work.michael@ubuntu:/usr/share/snmp/mibs$ snmpset -v 2c -c public 172.16.212.235 .1.3.6.1.4.1.9.9.16.1.1.1.16.333 integer 6CISCO-PING-MIB::ciscoPingEntryStatus.333 = INTEGER: destroy(6)michael@ubuntu:/usr/share/snmp/mibs$ snmpset...

mtiger · 04-11-2012

Hi,I try it, but it still does not work.michael@ubuntu:~$ snmpset -v 1 -c public 172.16.212.231 .1.3.6.1.4.1.9.9.16.1.1.1.16.222 integer 6SNMPv2-SMI::enterprises.9.9.16.1.1.1.16.222 = INTEGER: 6michael@ubuntu:~$ snmpset -v 1 -c public 172.16.212.231 ...

mtiger · 04-11-2012

Hi ,Thanks for your reply.I redo it again. but it still not work.michael@ubuntu:~$ snmpset -v 2c -c public 172.16.212.230 .1.3.6.1.4.1.9.9.16.1.1.1.16.333 integer 6SNMPv2-SMI::enterprises.9.9.16.1.1.1.16.333 = INTEGER: 6michael@ubuntu:~$ snmpset -v 2...

Member Since	‎02-11-2004 12:50 AM
Date Last Visited	‎07-08-2020 08:41 PM
Posts	24

User Statistics

User Activity

UCS C240M4S SSH response very slow

ASR9K Netflow with BGP as number question?

ASR9000 MOD80 Linecard performance?

Fiber channel Utilization calculation on ONS DWDM?

ASR1K VPLS VFI number Questions

Thanks! the AS number is

Hi Alexander, Thanks for your

Re: SNNP PING for IPv6 support ?

Re: SNNP PING for IPv6 support ?

Re: SNNP PING for IPv6 support ?