About Nitzbegin

Nitzbegin · 11-08-2014

Hi All,The Capacity Mgmt team gave me this for investigation.Serial NoInterfaceBandwidth31-Oct1-Nov2-Nov1SwitchA GigabitEthernet1/0/10 (Gi1/0/10) - *** L2 Link to SwitchB Gi4/27 ***10 MBit/s226.5 329.6 214.7 They reported that the 10Mbps link is ge...

Nitzbegin · 09-21-2014

I am doing a project to to capture the Syslog from the switches and routers, so for most of devices i can generate the syslog by giving the command " send log" and so that i would receive the same locally as well in the tool.Note : These devices are ...

Nitzbegin · 12-31-2013

Dear Techies,Please help me out in clearing this bug.CSCdp17107Awaiting your replies,Thanks,Nithin M

Nitzbegin · 08-20-2013

Hi All,I have a topology were, im using a Switcg 3560(L2), and a Router.. and 10 Systems connected to the Switch ( Access Ports- Port Fast configured).Highlevel Diagram:SYSTEMS(A) (VLAN100) >>ACCESS>> Switch(Sw1) >>>> TRUNK>>>> Router(R1)Eveerything ...

Nitzbegin · 06-06-2013

Hi Team,I am in need to run some script on Cisco ACS Server 5.3.Which i am trying to do but its not possible.I am able to login using the credentials but not able to execute the commands.I've found somthing like "Authenticating Using keyboard Interac...

Nitzbegin · 11-09-2014

Thanks Neno, It was very useful to me, Nithin,

Nitzbegin · 11-09-2014

Yes, I do suspect the same , the same would have happened, Can u confirm me, if they would have used 10BaseT OID to poll this information.Coz i got confused , that Cat 5 supports (10Mbps) and was suspecting Cat5 cable might be used for trunks. Can u ...

Nitzbegin · 11-08-2014

Hi Neno, Please find the requested info below,;------------------ On SwitchA ---------------------------SwitchA#sh run inter Gi1/0/10Building configuration...Current configuration : 385 bytes!interface GigabitEthernet1/0/10 description *** L2 Link to...

Nitzbegin · 12-31-2013

Yes !! i was also not able to view this..i found this in our customer environment where the issue was on one particular device which has reached the EOS\ •1. As this device reached EOS, so TAC cannot be opened and traceback cannot be decoded.•2. ...

Nitzbegin · 08-22-2013

Thanks Jawad,Yeah i had seen and found tat was also not available on my platform. Its a L2 Thanks,Nithin

Member Since	‎04-02-2013 02:30 AM
Date Last Visited	‎10-09-2017 01:34 PM
Posts	29

User Statistics

User Activity

Link Utilization is more than 200%

Trouble in Syslog Validation (send log)

Make me clear this BUG CSCdp17107

Packet drops !!!!!!

Cisco ACS 5.3 Keyboard Interactive Login -- Problem

Thanks Neno, It was very

Yes, I do suspect the same ,

Hi Neno, Please find the

Make me clear this BUG CSCdp17107

Packet drops !!!!!!