About jeffrsonk

jeffrsonk · 02-07-2014

Hello again! In case you saw my last post, I was successful in sorting out the isakmp problem with my site-to-site tunnel a couple of weeks ago.Everything is running fine now, except for one odd thing. First, some topology:Our main campus is Plant 1 ...

jeffrsonk · 01-24-2014

Hello everyone,Trying to set up a site-to-site VPN tunnel for a new building.At our central site we have KSIASA01, which has been running as a remote access VPN server with a static IP address, no NAT.At our new site we have KSIASA03, brand new ASA, ...

jeffrsonk · 12-03-2013

Hi guys,Long ago, I set up a couple of ASA 5505s as remote access VPNs. I didn't use the wizard, but created them manually inside ASDM with a bit of research and mucking about.Later this month, I'll need to take one of these existing 5505s and add a ...

jeffrsonk · 06-04-2013

Hi everyone,A couple of weeks ago, one of our ASA 5505s failed, and Cisco TAC shipped out a replacement. I was on vacation, and my assistant worked with TAC to get our backed-up configuration restored to the new hardware. This backup was just a copy ...

jeffrsonk · 06-04-2013

Hi everyone,We have a Business Edition 3000 system running version 8.6.4.10000-15. We're moving to Microsoft Office 2010 from 2003. Users who have moved to Office 2010 are reporting that Outlook is sending all of their voicemail notifications to Junk...

jeffrsonk · 02-10-2014

Gah!! How stupid of me. I had fixed that error once already during initial tunnel troubleshooting. I must have not written that change to memory, or something. All is well now. Thank you very much!!

jeffrsonk · 01-24-2014

Hi Jan,Thanks for the tip. I changed the network group Plant1-Plant2-MOS on ksiasa01 to match the one on ksiasa03. Also, I removed the ACL for icmp on outside_1_cryptomap. Still no luck, unfortunately.

jeffrsonk · 12-03-2013

Excellent idea! Thanks, I really appreciate the advice.

jeffrsonk · 12-03-2013

Great, thanks! I haven't set up a VPN of any kind on the ASA in almost three years, so I'm rusty.

jeffrsonk · 06-05-2013

Found the answer in the syslog -- said that my dynamic access policy wasn't set to "continue." It was, but not for the AD group I was using to test the connection. So the config was fine, but I had forgotten while on vacation that this VPN was for ad...

Member Since	‎07-31-2012 11:33 AM
Date Last Visited	‎09-19-2018 01:45 PM
Posts	14

User Statistics

User Activity

site-to-site between ASA 5505s: one subnet can't send traffic across VPN

site-to-site between 2 ASA 5505s: "received non-routine Notify message: No proposal chosen"

ASA 5505 ASDM VPN site-to-site wizard over existing remote access VPN

restored ASA 5505, now VPN doesn't work

voicemail notification e-mails from BE3000 marked as junk by Outlook 2010

site-to-site between ASA 5505s: one subnet can't send traffic ac

site-to-site between 2 ASA 5505s: "received non-routine Notify m

ASA 5505 ASDM VPN site-to-site wizard over existing remote acces

ASA 5505 ASDM VPN site-to-site wizard over existing remote acces

restored ASA 5505, now VPN doesn't work