About gthaliwal

gthaliwal · 03-12-2015

Hi there,I have a customer that want to migrate thier video estate from VCS 8.5 to CUCM 10.5. This will happen over some time as they slowly replace legacy endpoints that are only supported on VCS. They currently have conductor cluster controlling ...

gthaliwal · 03-20-2014

Hi there, In a recent deployment of an expressway v8.1 my client has requested I limit the incoming media ports from the internet as much as possible. They have purchased 10 traversal calls so I figure that would be 8 dynamic ports per call (pair f...

gthaliwal · 08-08-2013

Hi there,We have a 3241 ISDN which has all forms of remote access and file transfer (appart from https) disabled.We then set https client verification to required. We can now no longer access the unit on https or http. There is obviously something ...

gthaliwal · 05-08-2013

Hi guys,I cant seem to find a way of synchronising provisioned AD accounts in TMS 14.1. I have seen https://supportforums.cisco.com/thread/2143824 where a workaround has been suggested involving a scheduled SQL script in TMS 13.1. Can anybody advis...

gthaliwal · 12-19-2012

Hi all,I have a problem with a new TMS phonebook setup and have hit a small stubling block which I can't quite figure out:Client wanted an AD phonebook to facilitate VCS to CUCM dialing. CUCM is importing accounts from AD and with the extention bein...

gthaliwal · 03-15-2015

Thanks Manish, the document demonstrates the VCS and CUCM centric methods. These are already understood. My question was as to whether both models can co-exist on the same conductor. I hope to try this next week and if anyone's interested I will f...

gthaliwal · 03-23-2014

Hey guys, thanks both, this is exactley the quandry I have! Whichever way you look at it, the figures don't quite seem to add up. It would be nice to get an official response from Cisco. I may have to raise a TAC case on this to get clarity for th...

gthaliwal · 03-21-2014

Thanks for the responses gents. Dave you are correct, I want to limit the ports to 50000-50079 , this is to match the current capacity of the VCSe and to comply with the clients strict security policy. Sorry Chris, I should have clarified, this is t...

gthaliwal · 03-19-2014

Hi There, I am also seeing the same issue on VCS appliance 8.1.I was wondering if you managed to resolve this? Thanks

gthaliwal · 09-09-2013

The fix was to start the http service via the console, cant remember the exact syntax but it was something along the lines of 'service start http'. Once http was enabled I was able to browse into the unit and disable https cert authentication.Sent fr...

Member Since	‎07-28-2004 12:58 PM
Date Last Visited	‎11-02-2017 10:20 AM
Posts	48
Total Helpful Votes Received	1

User Statistics

User Activity

Conductor migration from to VCS and CUCM?

Restricting UDP media ports on vcse

How to Factory Default Telepresence ISDN 3241 from Console?

TMS Provisioning Import scheduler?

AD phonebook entries in TMS will only dial at 64kbps

Thanks Manish, the document

Hey guys, thanks both, this

Thanks for the responses

Hi There, I am also seeing

Re: How to Factory Default Telepresence ISDN 3241 from Console?