About Mats Huell

Mats Huell · 09-25-2013

Hello,it is possible to migrate date from prime LMS 4.2 to prime infrastructure 2.0? I don't want completely reconfigure the prime infrastrucutre.Kind regards

Mats Huell · 05-25-2012

Hello,i have a problem with the NTP Client from VSOM 6.3.2.The server lose the time after a reboot. When i start the NTP-Client manuel, than the time is correct.start NTP-Client:/etc/init.d/ntp startWhen i use the command "ntptime", i get the followi...

Mats Huell · 03-19-2012

Hello,I have a problem with the Cisco VSOM (Version 6.3.2).The Server Status is false.The display of the HDD capacity is not available. See the picture.What should I do to ensure that the status is displayed correctly.Kind regards The mrtg service is...

Mats Huell · 12-07-2015

Hi Sergio, i have exactly the same problem with Nexus 56128P. Any solutions for this problem? Kind regards Mats

Mats Huell · 12-12-2013

Hello,how can I save the config from a Cisco Catalyst 2950?This device do not support the command "do write mem" or "do copy run start".Kind regards

Mats Huell · 02-07-2013

Hello Pandian G K,in the following menu you can set the E-Mail Notification.I hope this helps.Event SetsAdmin-->Network-->Notification and Action Settings--> Event SetFault Notification GroupAdmin-->Network-->Notification and Action Settings--> Fault...

Mats Huell · 05-15-2012

Hello,i have the solution.The Problem was a configured port channel on SUSE10.After disables the port channel on linux and rebooted the services, everthing runs without problems.Kind RegardsMats Hüll

Member Since	‎03-19-2012 03:21 AM
Date Last Visited	‎11-08-2020 07:08 AM
Posts	7

User Statistics

User Activity

Prime LMS 4.2 migrate to Prime Infrastructure 2.0

VSOM 6.3.2 NTP returns code 5 (ERROR)

VSOM 6.3.2 Server Status false

Hi Sergio,

Cisco Prime Infrastructure 1.2 config deployment (no copy run st

Need to create threshold setting only for trunks in lms 4.2.2 ?

VSOM 6.3.2 Server Status false