Ian Stephens
Level 1
Level 1
Member since ‎08-05-2012
‎10-15-2019

User Statistics

  • 65 Posts
  • 0 Solutions
  • 19 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
50 Replies
20 Replies
10 Replies
5 Replies

User Activity

Hi there, We have recently upgraded our connection from 100Mbps to 1Gbps.We're currently running a 2901 with a very basic config (simple routing no NAT).We find that the most we can push through the 2901 is ~400Mbps.We, of course, need to upgrade the...
We are noticing that we max our WAN port out at 400 Mbps. We have a 1Gbps connection with our provider delivered over pure Ethernet (in a datacenter). Here is an example of the max-out using crude MRTG: We are directly connecting to our provider via ...
We are noticing some strange DHCP leases on our Cisco router.   We noticed this issue as the pool was moving up faster than we knew clients were requesting new addresses.   We noticed strange bindings like below: IP address Client-ID/ ...
Hi there, We have recently had a new leased line installed.  It comes in over fiber with an NTE which converts to a 100Mb Ethernet connection (straight into the router). We are guaranteed 100Mb up and 100Mb down from our provider. We are running NAT...
We are trying to apply QoS on a Dialer interface.  Every time we issue the command service-policy output upstream-policy - nothing happens and the config does not get applied.  No error messages appear.QoS config:class-map match-any web-class match p...
Community Statistics
Member Since ‎08-05-2012 12:49 PM
Date Last Visited ‎10-15-2019 10:52 AM
Posts 65