About Travis Hysuick

Travis Hysuick · 04-21-2020

Hi all, I'm working on a PoC utilizing an FTD virtual appliance for Anyconnect VPN connectivity; the customer is wanting to migrate from legacy ASA to FPWR and I thought this should be a relatively easy migration, though it's proven to be more challe...

Travis Hysuick · 03-27-2015

Hi all, The documentation on the Nexus 1000v Virtual Switch Update Manager VA are unfortunately very light on details as it relates to the required security roles that the VSUM VA account needs for vCenter integration. We created a separate account f...

Travis Hysuick · 10-10-2013

Hi all, this is a bit of an oddball topic but I've been asked to assist one of our remote sites with getting their newly purchased (rebranded) AT&T uVerse service from the demarc to a couple of remote buildings on-site where they want the STBs to res...

Travis Hysuick · 06-04-2013

Hi folks,Hoping some of you might be able to help out with an issue I'm seeing when using the Identity Privacy feature for PEAP-based WLAN authentication through ACS 5.4 and a Cisco WLC.What we are seeing in the Clients section of the Monitor tab on ...

Travis Hysuick · 10-28-2012

Hi all, just a quick note I wanted to point out for any of the AAA admin folks currently using Active Directory for their external identity store.I'd like to preface this post by saying that I strongly recommend that you purchase the SAS option for y...

Travis Hysuick · 04-22-2020

Well I think I asnwered my own question here... Based on CL presentation I ran across at <https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2016/pdf/BRKSEC-2203.pdf> this is absolutely expected behavior as the 3560-X is not configured for CTS and...

Travis Hysuick · 04-22-2020

Good morning Marvin, A wireshark capture was definitely helpful here and thank you for the suggestion, as I was NOT seeing the incoming DNS queries from the Anyconnect client arrive at the DNS server, although the FTDv WAS forwarding the traffic to t...

Travis Hysuick · 04-21-2020

Correct on all 3 counts Marvin, - The AnyConnect client does get the 0.0.0.0/0 secured route (tunnel all networks, send all DNS queries over the tunnel) - The FTDv is the single Internet egress for all the inside subnets (everything on the subnets be...

Travis Hysuick · 09-21-2015

Hi Chris, I never did open a case on this but we are planning to upgrade to v5.x in the very near future. As it were, I'm less than impressed with the documentation road-map on this product, but it is what it is; my team doesn't manage the VMWare inf...

Travis Hysuick · 12-20-2013

My advice to you is get an RMA opened on your controller.I just finished getting an RMA done up on my HA SKU controller that was exhibiting the exact behavior. Potenially bad Flash/NVRAM is very likely the culprit.

Member Since	‎01-30-2010 05:14 AM
Date Last Visited	‎01-05-2022 12:07 AM
Posts	37
Total Helpful Votes Received	23

User Statistics

User Activity

Anyconnect client on FTDv not passing traffic

VMWare role requirements for Virtual Switch Update Manager

Extending Multicast network at Layer 2 for IPTV service

ACS 5.4 and WLC - Issue with using Identity Privacy

Good news - bad news regarding CSACS and AD integration

Re: Anyconnect client on FTDv not passing traffic

Re: Anyconnect client on FTDv not passing traffic

Re: Anyconnect client on FTDv not passing traffic

Hi Chris, I never did open a

WLC 5508 always starting on Autoinstall