Hi Gents, We just upgraded an HA Firepower (FTD) 4140 to 6.6.4 and the said alert keeps popping up.Although I've read where to disable this, problem is, this is a highly secure firewall and completely isolated, meaning no internet access at all.When ...
Hi gents, We're going to be upgrading a HA cluster of Firepower 4140 along with their standalone vFMC, and after reviewing all documentation two doubts remain in the back on my head: Current versions:vFMC 6.3.0FXOS 2.6.1FTD 6.3.0 Target vesions:vFMC:...
Hi gents,Just came back from a customer intervention over their Firepower, having an issue with the timestamps on syslog messages.We've essentially forwarded both policy logs and platform events over to an external linux collector for a splunk to pic...
Hi folks, I have a customer who owns a FPR4140-NGFW-K9 with just the factory 8 port 10GB network module.Due to budget constraints, they want to upgrade with an additional 1 GB 8 port module and move some cables over from the original.Can be the HA po...
Hello folks,Altough the subject matter has been revisited a hundred times, all proposed configurations have not worked for me and therefore can't get the PCs to get an IP address when rebooting them, the switch will simply drom the DHCP traffic.To su...
Hi Marvin, Last query here.FTD can be done via the FMC right? As far as I can tell and as per the below article: https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/200896-Upgrading-an-FTD-HA-pair-on-Firepower-ap.html I believe the abo...
Hi @paul driver - thanks. We do indeed have dot1x auth implemtented and some ports actually have a MAB auth issue, but by the time we tested this ou we focused on two laptops hooked up to ports Gi2/0/21 and Gi4/0/6.I believe some dot1x output mixed u...
