About Jonathan Robb

Jonathan Robb · 03-14-2017

Hi Derek, If you have an existing Server Certificate and you click through to generate a new CSR, the existing server certificate will continue to work. It will place the CSR and new private key into a separate folder on the system from your current ...

Jonathan Robb · 10-11-2016

Hi Thomas, Unfortunately this sounds like the expected behavior, T3 calls are only supported with Telepresence Server Models 8710 and 7010. With Conductor in place in front of a 8710 or 7010 TPS, if the Conductor is configured for a B2BUA deploymen...

Jonathan Robb · 10-10-2016

Hi, What device type are you using in CUCM? With CE software on the DX series, it requires a device type of "Cisco Telepresence DX80" and not the "Cisco DX80" device Type. -Jonathan

Jonathan Robb · 10-05-2016

Sounds like the CUCM to Conductor side of the trunk is fine. Does your CUCM use a root and an intermediate in its certificate chain, and if so does the Conductor trust the Intermediate certificate in the trusted root CA list? -Jonathan

Jonathan Robb · 09-15-2016

Hi Amandeep, This is not an unsupportable deployment - from the TAC perspective it only matters that the FQDN of the TMSXE server with booking service can be found via DNS and port 443 over TCP is reachable from the outside. If you have any additiona...

Member Since	‎08-09-2011 02:47 PM
Date Last Visited	‎02-11-2022 12:01 AM
Posts	128
Total Helpful Votes Received	141

User Statistics

User Activity

Hi Derek,

Hi Thomas,

Hi,

Sounds like the CUCM to

Hi Amandeep,