I joined a company recently and observered their subnets use wouldn't go beyond two subnets (10.1.0.0/25 and 10.1.0.128/25) and wanted to change it now for a more robust network that can accomodate the company expansion drive (the company plan to ha...
Dear All,Kindly help analyse the attached proposed network topology of my company (and the branches) and advise me appropriately.I want to know if the design could work fine or if there are better way to achieve using different des...
I have an internet Router (Cisco 3845) with IOS version 12.4(9) T7 which I want enable for clientless SSL-VPN. My quetion is that can users with blackberry be able to connect to my mail server using IBM lotus in my corporate LAN?if not can I use any ...
I have a cisco 3750 swicth which i want to load a new ios to but unfortunately there's no enough space on the flash. This means that i need to backup the cureent (old) ios to my tftp server but the command keeps failing. It always gives 'No such file...
I have a Cisco 2960 switch that has an old ios (c2960-lanbase-mz.122-25.SEE2.bin) which i want to replace with a new ios (c2960-lanbasek9-mz.122-55.SE.bin) which I successfully uploaded from my tftp server.The new ios has been uploaded to the switch ...
Sam Byers,Once again thank you for all the support. You are such a reliable fellow. Below are my responses base on your enquiries and changes made on the new topology.1. I actually created two trunks link to the ASA because of the VLANs I created on ...
shillings,I noticed there was mistake in the design and the reason why you asked the question (which is the gateway for d vlans).The Cisco 3750 is the gateway for all the H/O Vlans! And routing is also enable on the switch so that the branch router t...
Hello Shivlu Jain/Sam Byers,Hope you are all doing well and fine!Find attached the adjusted network diagram for my company for your scrutiny and any possible advise. I would like you to specifically certified the network and various subnets use for ...
Dear Shivlu,I don't have a BGP with my ISP and I think the best option is to nat at the perimeter router as you rightly said.However, i would modify my design and upload for your to see as soon as I finished.Thank you.Usman Musa
Dear All,If you noticed I have changed the topic of our discussion. I believe with the above choiced words more people on cisco would be able to search and benefit with the knowledge.Thank you very much.Usman Musa.