First of all, I tried Jabber Video(Intranet) -> VCSC -> CUCM -> Jabber for windows, both audio and video are fine, by establishing SIP trunk between VCSC and CUCM, together with Zone and search rule settings in VCSC.Second, Jabber Video(Internet) ->V...
A few weeks before, it's working when the Movi(reside in VCS-C X7.2) calling Cisco Jabber for Windows(reside in CUCM 9.0), and I did the integration configuration according to the below link:http://www.cisco.com/en/US/docs/telepresence/infrastructure...
Hi, ExpertsWhen two Jabber video clients call each other, it may estalish the STUN when two client calling each other from Internet, then I guess it will shown as "Non-traversal call" in VCS Expressway; Also, it may estalish an TURN Relay when STUN f...
Hi, ExpertsThe architecture is as below:Movi or EX60 -> VCS Expressway -> VCS Control (Authentication through AD) -> TMSPEThe movi user can login by their username and password, also get phonebook correctly, but using the same user credentials, the E...
Hi, ExpertsCalling from xxx@jabber.com to the MCU, the dual stream works, and calling from xxx@mydomain.com to the MCU, audio/video are all worked fine, but the dual stream not working, any specific reason for this?
Hi, ArneThanks for the advice, and you're point the right, acutally i did it last night. But there are some still some questions for you:1. both VCSc and VCSe are running X7.22. Authentication Policy on TraversalZone: VCSe is set to "Do not check...
